GE / IP FANUC Series 90/30 In Stock

Email

sales@automationstop.com

Call Now

(919) 867-5794

Mon-Fri 8AM-5PM EST

Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.

Allen Bradley - Motors

MPL Servo Motors

The MPL series consists of low-inertia rotary servo motors with premium permanent magnets that are manufactured by Allen-Bradley. These servo motors are designed to fulfill the stringent requirements of various motion systems. The MP-series motors come with a mounting pilot to help operators mount the motor in a system. These motor units have a high torque-to-size ratio, innovative winding technology, good torque performance, rapid acceleration, and the ability to operate with a sustained shaft load. They are appropriate for use in a variety of industries and applications, including handling of materials, automotive, and conversion-type applications. Winding insulating materials are used in each MPL servo motor to improve thermal management. The installation adheres to all local rules and installation standards that improve safety and electromagnetic compatibility, and its IP66 protection ensures protection from strong jet water sprays and dust particles. The working temperature ranges from 0 to 40 degrees Celsius. MPL servo motors are offered in nine frame sizes that range from 63 and 75-millimeter frames to larger frames measuring 100 to 300 millimeters. High-energy rare-earth magnets are used in the MPL servo motors. This series of motors have power ratings ranging from 0.16 to 18.6 kilowatts, with some producing a speed of up to 8000 revolutions per minute (rev/min). Two-pole resolvers, 2000-line encoders, multi-turn encoding systems, and single-turn encoders using the Hiperface encoder protocol are among the available feedback options. Single-turn or multi-turn high-resolution encoders are standard on MP-series low-inertia motors. MPL motors are designed for use with Allen-Bradley controllers. The MP series has motors rated at 200 and 400 volts.

MPL Servo Motors

MPL (Low Inertia) servo motors from Allen Bradley are highly efficient and compact motors that are used for applications that demand motion sensitivity owing to significantly low rotor inertia. These motors have a high torque density (torque with respect to either weight or volume). These motors are brushless and are available in 9 different frame sizes. Premium permanent magnet is used in the construction of these motors. These servo motors are used with a range of Allen Bradley drive series (discussed later). MPL servo motors are ideally used for applications like assembling electronic components, packaging, material handling in different industries, automotive, and metal forming industries.

Mechanical and Electrical Specifications

Rotor and Rotor Magnets

MP Low Inertia servo motors are brushless AC motors. These motors are synchronous motors (recall the fact that magnet is present, no need for induction). For rotor flux production, their rotors are equipped with rare earth magnets which are premium in quality, and high in energy. These magnets pave way for quicker acceleration. Magnets on the rotors of MPL servo motors might have 8 different stack lengths (1 inch to 8 inch and corresponding codes as multiples of 10).

Rotors of these motors have threaded holes at their shaft end.

Stator Winding

Stator winding, which hugely decides the weight of the machine, is the major factor in determining torque and power density. To keep torque and power density high in MPL servo drives, stator winding is also made using innovative technology, and quality material is used for insulating this winding. Powerful rotor magnets and advanced stator windings make this motor provide 40% more torque (w.r.t. size) than conventional motors. This stator winding is also helpful in better heat management.

Motor Connectors and Cables

MPL servo motors can either have a connector that is a circular bayonet, and it faces a shaft (code 2) or these motors could come with a DIN connector that can rotate up to 180 degrees for ease of use. This connector is SpeedTec circular connector (code 7).

MPL servo motors also have brake (or power) connectors and feedback connectors as motion-sensitive applications need them. The supplier of this product will not provide auxiliary feedback, motor feedback, and I/O connector kits as accessories to the buyer.

Cables provided by the factory manufacturer will have standard length. These cables have appropriate sealing to ensure that the motor achieves promised environmental ratings as well as shield termination. These cables meet specifications and requirements of the following standards: NFPA 79 (National Fire Protection Association code 79) compliant, DESINA cable jacket coloring, tray cable rating, 600V insulation rating, RoHS and REACH, UL-Listed. Customers can also go with the option of designing their cables. For this purpose, kits are made available by Rockwell Automation. The construction of the cable would also affect the Electromagnetic Compatibility (EMC) of the system so extreme care is needed while constructing the cable. Shield of either type of cable would need grounding; it could be hazardous otherwise.

Allen Bradley directs its user that connector housings in the case of M40 and M23 can be rotated to make connector placement in a rearward direction. While connector housings for M58 must be removed physically and placed back in 90 degrees increments.

Shaft Seal

Not all servo motors of the MP Low inertia series come with a shaft seal. The user has to decide if, for some applications and the environment, a shaft seal is needed or not. The shaft seal will ensure that dust particles and moisture content does not enter motor bearings. Moreover, the type of use will also determine the frequency or duration of maintenance and replacement of shaft seals because these wear with time. Allen Bradley recommends users of these motors to inspect and maintain this component regularly – typically every 3 months but not to go beyond 12 months.

For these servo motors, nitrile is used to build shaft seals. For smooth operation of the shaft seal, a lubricant is included in the accessories package. To lubricate the shaft seal, the use of a shaft seal kit is recommended provided by Rockwell Automation. For different servo motors in the MPL series, different shaft seal kits are available, e.g., for motor catalog numbers MPL-A15xx and MPL-B15xx, the shaft seal kit with catalog number MPL-SSN-F63F75 is recommended, while for motor catalog numbers MPL-A3xx and MPL-B3xx, the shaft seal kit with the catalog number MPL-SSN-A3B3 is suggested, and so on. Furthermore, Rockwell Automation recommends its users use its shaft seals. If the owner uses shaft seals from any other company, then any sort of warranty (implied or direct) is not entertained by Rockwell Automation.

The presence or absence of a shaft seal will also determine which standards the product will comply with (discussed later in detail).

Mounting Dimensions

For MPL servo motors, the IEC72-1 standard for rotating electrical machines is complied with while making mounting dimensions. Indirectly, it covers frame numbers all from 56 to 400 and flange numbers ranging between 55 and 1080. Their mounting flanges have free mounting holes of type FF.

Frame Sizes

Allen Bradley has used novel design techniques (e.g. while designing stator winding, choosing winding insulation, placement of magnets, choice of magnets, etc.) to keep the size of MPL servo motors as low as possible. As mentioned, motors from this series of Allen Bradley products are available in nine different frame sizes – all being compact and sturdy. These frame sizes and the corresponding codes are as follows:

  • Code 15 indicates a frame size of 63 mm
  • Code 2 indicates a frame size of 75 mm
  • Code 3 indicates a frame size of 100 mm
  • Code 4 indicates a frame size of 115 mm
  • Code 45 indicates a frame size of 130 mm
  • Code 5 indicates a frames size of 165 mm
  • Code 6 indicates a frame size of 215 mm
  • Code 8 indicates a frame size of 265 mm
  • Code 9 indicates a frame size of 300 mm

Encoders and Feedback

Servo motors from the MPL series are used for those motion applications which require high performance. High-resolution encoders are also there to determine the accurate position of the rotor. Thus, these motors have efficient high-resolution feedback systems. This feedback could be either single turn (-E and –S) or multi-turn (-V and -M) through the encoder. In single turn feedback systems, the absolute position of the rotor is fed back to the controller in just one turn while maintaining high resolution. On the other hand, 4096 turns are needed to provide high-resolution feedback in multi-turn encoder systems. This feedback would also be the absolute position of the motor rotor.

 Motors with the –M and –S code can make up to two million counts in one revolution while motors with code –E and –V give up to two hundred and sixty counts in one revolution – all giving smooth performance.

Motors in the MPL series also have the option of an incremental encoder (with Code ‘H’) and resolver (with code ‘R’).

Brake Availability

MPL servo motors could either have a 24V DC brake (code 4) or no brake at all (code 2). If the brake is present, it will keep the motor shaft still or hold it at 0rpm (revolutions per minute) unless applied torque remains below the rated holding torque for the brake. Anyhow, this brake is not to bring the motor to a stop.

For disengaging this brake, a separate power source is needed. This power can be provided by a servo motor controller or an operator control which could be manual.

On-board Memory for Commissioning

To know motor parameters, the system doesn’t need to perform commissioning of these MPL servo motors from scratch. Instead, these motors are equipped with a memory unit to store the identity of the motor. So, upon startup, the system could identify motor, and commissioning time could be reduced significantly.

Voltage Class

Motors from the MPL series are grouped into two classes based on operating voltage: 200V class and 400V class. In the catalog number MPL-xxxxxx-xx7xAA, the first 'x' is to distinguish between voltage classes. Because of two options for voltage, A is for 200V class of motors and B is that for 400V class motors.

Compatibility for Drives

The motor, being the crucial part of a drive system, needs to be designed while considering application requirements and characteristics of other components in the drive system. In other words, the motor’s compatibility with the drive should be kept in mind. MP Low inertia servo motors are compatible with the following Allen Bradley drive systems: Kinetix 5500, Kinetix 6200, Kinetix 6500, Kinetix 6000, Kinetix 300, Kinetix 350, Kinetix 2000, Kinetix 7000, and Ultra3000.

Torque Output

Servo motors from the MPL series give its users a wide range of options for torque. Different motors from this series are capable of providing continuous stall torque in the range of 0.26 to 163Nm while peak stall torque goes up to 278Nm (e.g. catalog number MPL-B980B) starting from 0.77Nm (e.g. catalog number MPL-A1510V). Servo motors in MP Low inertia series give 40% higher torque output than that of other servo motors of the same size.

Speed Output

Servo motors of the MP Low Inertia series can attain speed up to 8000 rpm (revolutions per Minute). Other available options for rated speeds and respective codes are given below.

  • Code B indicates a rated speed of 1000 rpm
  • Code C indicates a rated speed of 1500 rpm
  • Code D indicates a rated speed of 2000 rpm
  • Code F indicates a rated speed of 3000 rpm
  • Code H indicates a rated speed of 3500 rpm
  • Code J indicates a rated speed of 3750 rpm
  • Code K indicates a rated speed of 4000 rpm
  • Code P indicates a rated speed of 5000 rpm
  • Code Y indicates a rated speed of 6000 rpm
  • Code U indicates a rated speed of 7000 rpm
  • Code V indicates a rated speed of 8000 rpm

Power Output

Like torque, motors in MP Low inertia series have higher power density as well. Rated output (in kW) at respective rated speed can go up to 18.6kW (e.g., motor catalog number MPL-B980D) starting from a small figure of 0.16kW (e.g., motor catalog number MPL-A1510V).

Environmental Specifications

Rockwell Automation has made low inertia servo motors of the MPL series compatible with IP50 or IP66 depending upon the absence or presence of a shaft seal. If there is no shaft seal then the motor follows the IP50 standard minimum (typically IP50 if the shaft is mounted in an upward direction, IP51 if the shaft is installed in a horizontal direction, and IP53 if the shaft is installed in a downward direction). If there is a shaft seal (optional) then the IP66 standard is mandatory (so concerned equipment becomes dust and drip-free). Furthermore, the manufacturer binds its users to use those cable connectors which are environmentally sealed.

As far as the operating temperature is concerned, these servo motors are recommended to be used in the locality where the temperature ranges between 0 and 40 degrees centigrade. Anyhow, storage temperature can range between -30 and 70 degrees centigrade. If the temperature doesn’t remain within prescribed limits, then the owner must make arrangements for enough clearance, airflow, and heatsink.

While storing it must be ensured that the atmosphere is noncorrosive. Relative humidity at the storage site could be anywhere between 5 and 95% noncondensing.

Thermal Management

MPL series servo motors are designed to be smaller in size which complicates the heat management system. But advanced winding techniques, winding insulation, and winding material make this motor thermally efficient. Moreover, the presence of magnets instead of another winding also makes these motors more efficient thermally. During the designing process, heat transfer is also paid heed to. Anyhow, the manufacturer suggests not enclosing the motor except in situations when a forced-air mechanism is used to cool down the motor. It is also suggested that no such devices are placed near motors that produce heat. Aluminum heatsinks can also be used to dissipate heat more efficiently.

Certifications

MP Low inertia servo motors are components that are UL Recognized to corresponding CSA and UL standards. These servo motors are also CE marked for all applicable directives.

Other Products of the MP Series

Low inertia motors are regarded as one product of the MP series, as there are two more products of the MP series as well. These are MP series food-grade motors and stainless-steel motors. These two types of products are designed to meet some extra application requirements.

MP series food grade motors mainly possess characteristics of MP Low inertia motors but they also meet additional requirements of food and beverage related applications e.g. packaging. These motors are designed to have better sealing and food-grade coatings so they could be used near food items. Similarly, MP series stainless steel motors are designed to work in hygienic environments. These motors can be used safely in dairy and poultry-related applications where there could be a corrosive atmosphere or high pressure. These motors are ensured to be leakproof and they are factory sealed to achieve this purpose.

Browse our selection of MPL Servo Motors units

AutomationStop.com's online catalog offers one of the largest selections of preowned MPL Servo Motors units in the world.

MPL-B230P-EJ72AA

The MPL-B230P-EJ72AA low-inertia servo motor from Allen Bradley has a speed rating of 5000 revolutions per minute. This unit belongs to the MP series of Allen Bradley servo motors. It has a 75 mm frame, along with a 3.0 in. magnetic stack. For feedback purposes, the MPL-B230P-EJ72AA utilizes a single turn encoder with high resolution. This product may be mounted via the use of a mounting flange.

MPL-B230P-EJ74AA

The MPL-B230P-EJ74AA MP-series low-inertia servo motor was designed by Allen Bradley. This motor has a 75-millimeter frame, in addition to a 3.0-inch-long magnet stack. The MPL-B230P-EJ74AA has a 400-volt AC voltage rating, and it operates at 5000 revolutions per minute. For feedback purposes, a single-turn high-resolution encoder is integrated into this unit.

MPL-B230P-VJ42AA

A product of Allen Bradley, the MPL-B230P-VJ42AA servo motor has a 400 VAC rating, as well as low inertia. The frame of this motor measures 75 millimeters, and the magnetic stack measures 3.0 inches. The MPL-B230P-VJ42AA has a rated speed of 5000 rev/min. For feedback purposes, this servo motor includes a multi-turn encoder. The MPL-B230P-VJ42AA servo motor can be mounted via the use of a mounting flange.

MPL-B230P-VJ44AA

Part number MPL-B230P-VJ44AA is a 400-volt servo motor from Allen-Bradley. This product has low inertia and a speed rating of 5000 revolutions per minute. The frame of this motor measures 75 millimeters, and the magnetic stack measures 3.0 inches. The MPL-B230P-VJ44AA includes a high-resolution encoder that provides feedback in multiple turns. This servo motor also features a brake rated at 24 volts direct current (DC).Part number MPL-B230P-VJ44AA is a 400-volt servo motor from Allen-Bradley. This product has low inertia and a speed rating of 5000 revolutions per minute. The frame of this motor measures 75 millimeters, and the magnetic stack measures 3.0 inches. The MPL-B230P-VJ44AA includes a high-resolution encoder that provides feedback in multiple turns. This servo motor also features a brake rated at 24 volts direct current (DC).

MPL-B230P-VJ72AA

Part number MPL-B230P-VJ72AA is a low-inertia servo motor with a 400-volt AC rating. This servo motor was designed and produced by Allen Bradley. The MPL-B230P-VJ72AA has a 75-millimeter frame, in addition to a 3.0-inch magnet stack. This motor operates at speeds rated up to 5000 r/min. A multi-turn encoder is used to provide the MPL-B230P-VJ72AA feedback. This unit has circular DIN connectors and a mounting flange.

MPL-B230P-VJ74AA

The MPL-B230P-VJ74AA servo motor from Allen Bradley has low inertia and a 400-volt rating. This unit's frame measures 75 millimeters and its magnetic stack measures three (3.0) inches. The MPL-B230P-VJ74AA has an operational speed rated at 5000 rev/min. This motor includes a high-resolution encoder used for providing feedback in multiple turns. A 24-volt DC brake is also included in this servo motor.

MPL-B310P-HJ22AA

The MPL-B310P-HJ22AA servo motor was designed and produced by Allen Bradley/Rockwell Automation. This servo motor has a 400-volt rating and low inertia. The frame of this motor measures 100 millimeters, and the magnet stack measures 1.0 inch. The MPL-B310P-HJ22AA operates at a rated speed of 5000 rev/min. A 2000-line encoder provides this servo motor with absolute position feedback. The MPL-B310P-HJ22AA is suitable for applications that require speed and/or motion control.

MPL-B310P-HJ72AA

Part number MPL-B310P-HJ72AA is a 400-volt low-inertia servo motor from Allen Bradley. This motor operates at a rated speed of 5000 r/min. The frame size of this device is 100 millimeters. Additionally, the magnet stack length is one inch. The MPL-B310P-HJ72AA servo motor features a 2000-line encoder for feedback purposes. This unit has circular DIN connectors and a flange for mounting.

MPL-B310P-HK22AA

The Allen Bradley MPL-B310P-HK22AA servo motor can be used in speed and motion control applications. This unit has a speed rating of 5000 r/min, in addition to a voltage rating of 400 volts AC. The frame of this motor measures 100 millimeters, and the magnetic stack measures 1.0 inch. The MPL-B310P-HK22AA utilizes a 2000-line encoder for feedback purposes. This servo motor can be mounted through the use of a mounting flange.

MPL-B310P-HK72AA

Designed by Allen Bradley, the MPL-B310P-HK72AA low-inertia servo motor has a voltage rating of 400 VAC. This product was designed to be used in applications that require speed control or motion control. The MPL-B310P-HK72AA's frame measures 100 millimeters, and its magnetic stack measures one (1.0) inch. This servo motor is capable of operating at a speed of 5000 revolutions per minute. A 2000-line encoder is featured with this motor. Furthermore, the MPL-B310P-HK72AA's connectors are classified as circular DIN connectors.

MPL-B310P-MJ22AA

The Allen Bradley MPL-B310P-MJ22AA is an MP-series low inertia brushless servo motor that requires a three-phase 460-volt AC voltage to operate. This device has a 100-millimeter frame and a 1-inch magnet stack. This servo motor has a 5000 rev/min rated speed, as well as a 1.58 Nm rated torque. For feedback purposes, this motor includes a multi-turn high-resolution encoder.

MPL-B310P-MJ24AA

Allen Bradley designed and produced the MPL-B310P-MJ24AA servo motor. This product has a 400-volt AC voltage rating, as well as low inertia. This servo motor is typically utilized for motion control or speed control applications. The MPL-B310P-MJ24AA features a 100-millimeter frame, in addition to a one-inch magnet stack. The base speed of this servo motor is rated at 5000 revolutions per minute. This motor utilizes a multi-turn encoder for feedback purposes.

MPL-B310P-MJ72AA

The Allen Bradley MPL-B310P-MJ72AA is a low-inertia brushless servo motor. It has a 460 VAC voltage rating, a 100 mm frame, and a 25.4 mm magnetic stack length. The operating speed of this device is 5000 rev/min, and the rated torque is 1.58 Nm. The MPL-B310P-MJ72AA features a multi-turn high-resolution encoder for feedback purposes.

MPL-B310P-MJ74AA

Product number MPL-B310P-MJ74AA was produced by Allen Bradley. It is an MP-series servo motor with low inertia. The rated voltage of this device is 400 volts, and the rated speed is 5000 r/min. For feedback purposes, the MPL-B310P-MJ74AA includes a multi-turn encoder. This unit also includes circular DIN connectors and a 24-volt direct current (DC) brake.

MPL-B310P-MK22AA

Part number MPL-B310P-MK22AA is an MP-series low-inertia servo motor produced by Allen Bradley. This device operates at 400-volts AC and 5000 rev/min. This product has a 100 mm frame, along with a 1.0 in. magnetic stack. The MPL-B310P-MK22AA servo motor features a multi-turn encoder for feedback purposes. It also features circular bayonet connectors and a mounting flange.

MPL-B310P-MK24AA

Catalog number MPL-B310P-MK24AA is an Allen Bradley low-inertia servo motor. This motor operates at a voltage of 400 volts alternating current (AC), as well as at a speed of 5000 r/min. This product's frame measures 100 millimeters. Additionally, the magnetic stack of this servo motor measures one inch. The MPL-B310P-MK24AA includes a multi-turn encoder for feedback purposes. This servo motor also includes circular bayonet connectors and a 24-volt direct current (DC) brake.

MPL-B310P-MK72AA

Designed and produced by Allen Bradley, the MPL-B310P-MK72AA servo motor has low inertia and operates at 400 volts AC. This unit has a 100-millimeter frame, as well as a one-inch magnetic stack. Furthermore, this servo motor has a 5000 rpm rated speed. The MPL-B310P-MK72AA features a high-resolution encoder that is capable of providing feedback in multiple rotations. This servo motor has circular DIN connectors, in addition to a mounting flange.

MPL-B310P-MK74AA

Product number MPL-B310P-MK74AA, which was produced by Allen-Bradley, is an MP-series servo motor. This device is generally utilized in applications that require speed control or motion control. The MPL-B310P-MK74AA has a frame size of 100 millimeters, as well as a magnet stack length of 1.0 inch. This motor can operate at speeds rated up to 5000 revolutions per minute. The MPL-B310P-MK74AA is equipped with a multi-turn encoder.

MPL-B310P-RJ22AA

Part number MPL-B310P-RJ22AA is a low-inertia servo motor from Allen Bradley. This unit operates at 400 VAC and 5000 rev/min. It has a 100-millimeter frame, as well as a one-inch magnetic stack. The MPL-B310P-RJ22AA servo motor features a 2-pole resolver for feedback purposes. The connectors of this product are classified as circular bayonet connectors. This product is suitable for use in speed control applications, as well as motion control applications.

MPL-B310P-RJ24AA

The MPL-B310P-RJ24AA servo motor from Allen Bradley has low inertia. This product operates at a voltage of 400 volts AC, in addition to a speed of 5000 r/min. This unit has a frame that measures 100 millimeters. It also has a magnetic stack that measures one inch. For feedback purposes, the MPL-B310P-RJ24AA servo motor features a 2-pole resolver. This product also features a 24-volt DC brake and circular bayonet connectors.

MPL-B310P-RJ72AA

Catalog number MPL-B310P-RJ72AA is a servo motor with low inertia. It was designed by Allen Bradley and belongs to the MP product series. This servo motor operates at a rated voltage of 400 volts AC, as well as a rated speed of 5000 r/min. This product's frame measures 100 millimeters. Additionally, its magnetic stack measures one inch. The MPL-B310P-RJ72AA includes a 2-pole resolver for feedback purposes. The MPL-B310P-RJ72AA also includes circular DIN connectors and a flange for mounting purposes.

MPL-B310P-RJ74AA

The Allen Bradley MPL-B310P-RJ74AA servo motor has low inertia and operates at 400 volts AC. This unit has a 100-millimeter-sized frame, in addition to a one-inch-long magnetic stack. This servo motor operates at a rated speed of 5000 revolutions per minute. The MPL-B310P-RJ74AA includes a 2-pole resolver for feedback purposes, in addition to a flange for mounting purposes. This servo motor has circular DIN connectors and a 24-volt DC brake.

MPL-B310P-RK22AA

Product number MPL-B310P-RK22AA is a low-inertia servo motor from Allen Bradley. This motor operates at a 400-volt AC-rated voltage and a 5000 rpm rated speed. This motor has a frame measuring 100 millimeters, as well as a magnet stack measuring one inch. The MPL-B310P-RK22AA servo motor features a 2-pole resolver for feedback purposes. Furthermore, this product features a flange for mounting purposes.

MPL-B310P-RK24AA

The MPL-B310P-RK24AA, which was produced by Allen Bradley, is a low-inertia servo motor. It operates at a voltage of 400 volts AC and a speed of 5000 rpm. The frame of this motor measures 100 millimeters. Additionally, the magnet stack measures one inch. The MPL-B310P-RK24AA features a 2-pole resolver for feedback purposes. This servo motor has circular bayonet connectors, as well as a 24-volt DC brake. The MPL-B310P-RK24AA can be flange mounted.

MPL-B310P-RK72AA

Part number MPL-B310P-RK72AA is a servo motor from Allen Bradley. This device has low inertia and a voltage rating of 400 volts AC. In addition, this servo motor operates at a base speed of 5000 rev/min. This product has a 100-millimeter frame and a one-inch-long magnet stack. The MPL-B310P-RK72AA includes a 2-pole resolver for feedback purposes. Furthermore, this servo motor also features circular DIN connectors.

MPL-B310P-RK74AA

Catalog number MPL-B310P-RK74AA is a low-inertia servo motor from Allen Bradley. It has a 400-volt rating and can operate at 5000 rpm. The frame size of this motor measures 100 millimeters. Additionally, the magnetic stack length is one inch. For feedback purposes, the MPL-B310P-RK74AA servo motor is equipped with a 2-pole resolver. This device features a 24-volt DC brake and circular DIN connectors.

MPL-B310P-SJ22AA

Product number MPL-B310P-SJ22AA is a 400-volt, low-inertia servo motor produced by Allen Bradley. This unit's frame measures 100 millimeters, and its magnetic stack measures one inch. The MPL-B310P-SJ22AA can operate at a speed of 5000 rpm. This servo motor includes a single-turn encoder for feedback purposes. Furthermore, the MPL-B310P-SJ22AA includes circular bayonet connectors and a flange for mounting.

MPL-B310P-SJ24AA

Part number MPL-B310P-SJ24AA is an MP-series low-inertia servo motor from Allen Bradley. The frame size of this device is 100 mm. It is a brushless motor with single-turn encoder feedback. The MPL-B310P-SJ24AA has a 1 in. stack length. This servo motor has a 5000 rpm speed rating and a 400-volt AC voltage rating.

MPL-B310P-SJ72AA

The MPL-B310P-SJ72AA is an Allen Bradley servo motor. It is a low inertia servo motor that runs on an AC power supply. It is a 400-volt motor. Additionally, it has a 100-millimeter-sized frame. The magnetic stack length of this unit is 1 inch. Furthermore, this AC servo motor's speed is rated at 5000 RPM.

MPL-B310P-SJ74AA

The Allen Bradley MPL-B310P-SJ74AA servo motor operates at 5000 rev/min. The voltage rating of this unit is 400 volts AC. It has a 100-millimeter frame, as well as a 1.0-inch-long magnet stack. For feedback, this servo motor utilizes a single-turn encoder. The MPL-B310P-SJ74AA features circular DIN connectors and 24-volt DC brakes. This product can be mounted with a mounting flange.

MPL-B310P-SK22AA

The MPL-B310P-SK22AA servo motor from Allen Bradley/Rockwell Automation has low inertia and a rated voltage of 400 volts. This unit has a 100 mm frame and a 1.0 in. magnet stack. This servo motor can operate at a 5000 r/min rated speed. The MPL-B310P-SK22AA features a single-turn encoder for feedback purposes. This servo motor is suitable for use in speed control or motion control applications.

MPL-B310P-SK24AA

Part number MPL-B310P-SK24AA, which is a product of Allen Bradley, is a low-inertia servo motor. This unit has a 400-volt AC voltage, along with a 5000 rpm speed rating. The MPL-B310P-SK24AA's frame measures 100 millimeters. Also, this servo motor's magnet stack measures 1.0 inch. This motor includes an encoder that can provide feedback in one rotation. The MPL-B310P-SK24AA is equipped with a 24 VDC brake.

MPL-B310P-SK72AA

Part number MPL-B310P-SK72AA is a servo motor that was produced by Allen Bradley. This motor has a voltage rating of 400 volts. The rated speed at which this unit operates is 5000 revolutions per minute. The frame size of the MPL-B310P-SK72AA measures 100 millimeters. Additionally, the magnetic stack of this servo motor measures 1.0 inch long. For feedback, the MPL-B310P-SK72AA has a single-turn encoder. This device has a circular DIN connector.

MPL-B310P-SK74AA

Part number MPL-B310P-SK74AA is an Allen-Bradley MP-series servo motor. This unit has low inertia and a 400 VAC voltage rating. The size of the MPL-B310P-SK74AA's frame measures 100 millimeters, and its magnetic stack has a length that measures one (1.0) inch. This servo motor operates at 5000 rev/min. This unit has circular DIN connectors, in addition to 24 VDC brakes. The MPL-B310P-SK74AA is generally used in applications that require motion and/or position control.

MPL-B320P-HK74AA

Part number MPL-B320P-HK74AA is an Allen Bradley MP-series servo motor with low inertia and a 400-volt AC voltage rating. This device has a 100-millimeter frame and a 2.0-inch-long magnet stack. This motor can operate at speeds rated at 5000 rev/min. The MPL-B320P-HK74AA servo motor features a 2000-line encoder for feedback purposes. This product has circular DIN connectors and a 24-volt DC brake.

MPL-B320P-MJ22AA

Manufactured by Allen Bradley, product number MPL-B320P-MJ22AA is a servo motor. This motor has a 460 VAC voltage rating and low inertia. It has a 100 mm frame and a 2.0 in. magnetic stack length. The MPL-B320P-MJ22AA operates at five thousand (5000) revolutions per minute. This servo motor features a circular bayonet connector. An IEC metric mounting flange is installed on this servo motor.

MPL-B320P-MJ24AA

Product number MPL-B320P-MJ24AA is a 400-volt AC servo motor manufactured by Allen Bradley. This unit has low inertia and can operate at 5000 revolutions per minute. This motor has a 100-millimeter-sized frame and a 2.0-inch-long magnet stack. The MPL-B320P-MJ24AA servo motor features a multi-turn encoder for feedback purposes. This product is suitable for use in applications that require speed control or motion control.

MPL-B320P-MJ72AA

Produced by Allen Bradley / Rockwell Automation, part number MPL-B320P-MJ72AA is a low-inertia servo motor from the MP series. It has a 400-volt rating. The MPL-B320P-MJ72AA has a frame measuring 100 millimeters, and a magnetic stack length measuring 2.0 inches. The speed of this servo motor is rated as 5000 rev/min. A multi-turn high-resolution encoder provides feedback to the MPL-B320P-MJ72AA servo motor.

MPL-B320P-MJ74AA

Part number MPL-B320P-MJ74AA is a low-inertia servo motor. This unit was designed and produced by Allen Bradley/Rockwell Automation as part of the MP series of servo motors. This device has a 460 VAC voltage rating. Its frame measures 100 millimeters, and its magnetic stack measures 2.0 inches. The MPL-B320P-MJ74AA operates at 5000 r/min. This motor is equipped with a 24 VDC brake.

MPL-B320P-MK22AA

The MPL-B320P-MK22AA is a rotary servo motor from Allen Bradley. It has low inertia. It is a premium permeant magnetic servo motor. It is a 400 volts AC unit with a 100 mm frame. This unit has a 5000 RPM-rated speed.

MPL-B320P-MK24AA

Catalog number MPL-B320P-MK24AA is a low-inertia servo motor. This unit is a product of Allen-Bradley, and it belongs to the MP line of servo motors. This product has a 5000 rpm speed rating, as well as a 400 VAC voltage rating. The MPL-B320P-MK24AA has a 100 mm frame and a two-inch-long magnetic stack. This servo motor includes a multi-turn encoder, which is used to provide absolute position feedback. The MPL-B320P-MK24AA also includes a 24 VDC brake.

MPL-B320P-MK72AA

Product number MPL-B320P-MK72AA is a low-inertia servo motor with a 400-volt AC voltage rating. The frame of this motor measures 100 millimeters, and the magnet stack measures 2.0 inches. The speed of this servo motor is rated at 5000 rev/min. For feedback purposes, the MPL-B320P-MK72AA servo motor includes a multi-turn encoder. This unit has circular DIN connectors and a mounting flange.

MPL-B320P-MK74AA

Catalog number MPL-B320P-MK74AA is a 400-volt AC servo motor from Allen Bradley. This motor has low inertia and can operate at 5000 rpm. The frame of this servo motor measures 100 millimeters. In addition, the magnetic stack of this product measures 2.0 inches. Catalog number MPL-B320P-MK74AA features a high-resolution encoder that is capable of providing feedback in multiple rotations. This device has circular DIN connectors, as well as a 24-volt DC brake.

MPL-B320P-RJ22AA

Product number MPL-B320P-RJ22AA is an Allen Bradley low-inertia servo motor with a 400-volt AC-rated voltage. This motor has a frame measuring 100 millimeters and a magnet stack measuring 2.0 inches. The MPL-B320P-RJ22AA is capable of operating at a 5000 r/min rated speed. This motor includes a 2-pole resolver for feedback purposes. The MPL-B320P-RJ22AA has circular bayonet connectors, as well as a mounting flange.

MPL-B320P-RJ24AA

Part number MPL-B320P-RJ24AA is a 400 VAC low-inertia servo motor. This product was designed by Allen Bradley, and it belongs to the MP servo motor series. This device has a 100 mm frame, as well as a 2.0 in. magnetic stack. This servo motor can operate at a speed of 5000 r/min. The Allen Bradley MPL-B320P-RJ24AA has a 2-pole resolver for feedback purposes. This motor includes a 24 VDC brake and circular bayonet connectors. This product can be used in motion control applications and speed control applications.

MPL-B320P-RJ72AA

The Allen Bradley MPL-B320P-RJ72AA is an MP-series low-inertia servo motor. This unit has a 400-volt rating and can operate at 5000 rev/min. This servo motor has a 100-millimeter frame, in addition to a 2.0-inch-long magnetic stack. For feedback purposes, the MPL-B320P-RJ72AA servo motor is equipped with a 2-pole resolver. This product has circular DIN connectors, as well as a flange for mounting purposes.

MPL-B320P-RJ74AA

Part number MPL-B320P-RJ74AA, which was produced by Allen Bradley, is an MP-series low-inertia servo motor with a rated voltage of 400 volts. This unit's frame measures 100 millimeters. Additionally, the magnetic stack of this motor has a length of 2.0 inches. The MPL-B320P-RJ74AA can operate at 5000 revolutions per minute. This servo motor features a 2-pole resolver for feedback purposes. The MPL-B320P-RJ74AA also features a 24-volt DC brake and circular DIN connectors.

MPL-B320P-RK22AA

Catalog number MPL-B320P-RK22AA is a servo motor produced by Allen-Bradley. This unit has low inertia and a 400-volt rating. The frame of this product measures 100 millimeters, and the magnetic stack measures 2.0 inches. The MPL-B320P-RK22AA is capable of operating at 5000 rpm. This product utilizes a 2-pole resolver to provide feedback. It also includes circular bayonet connectors and a mounting flange.

MPL-B320P-RK24AA

The Allen-Bradley MPL-B320P-RK24AA is an MP-series servo motor. This motor has a 400-volt AC voltage rating, as well as a 5000 rpm speed rating. The MPL-B320P-RK24AA has a 100 mm frame and a 2.0 in. magnetic stack. A 2-pole resolver is utilized by this servo motor to provide feedback. The connectors of the MPL-B320P-RK24AA are classified as circular bayonet connectors. Furthermore, this product is equipped with brakes rated at 24 volts DC.

MPL-B320P-RK72AA

The MPL-B320P-RK72AA servo motor, which was produced by Allen Bradley, has low inertia and a 400-volt AC voltage rating. The frame of this product measures 100 mm, and the magnetic stack measures 2.0 inches. The MPL-B320P-RK72AA is capable of operating at 5000 rev/min. This servo motor utilizes a 2-pole resolver to provide absolute position feedback. The MPL-B320P-RK72AA has circular DIN connectors, as well as a mounting flange.
Previous 1

...

5

6

7

...

12 Next

Displaying 50 of 573 results.

Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.

Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

TOP