GE / IP FANUC Series 90/30 In Stock

Email

sales@automationstop.com

Call Now

(919) 867-5794

Mon-Fri 8AM-5PM EST

Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.

Allen Bradley - Motors

MPL Servo Motors

The MPL series consists of low-inertia rotary servo motors with premium permanent magnets that are manufactured by Allen-Bradley. These servo motors are designed to fulfill the stringent requirements of various motion systems. The MP-series motors come with a mounting pilot to help operators mount the motor in a system. These motor units have a high torque-to-size ratio, innovative winding technology, good torque performance, rapid acceleration, and the ability to operate with a sustained shaft load. They are appropriate for use in a variety of industries and applications, including handling of materials, automotive, and conversion-type applications. Winding insulating materials are used in each MPL servo motor to improve thermal management. The installation adheres to all local rules and installation standards that improve safety and electromagnetic compatibility, and its IP66 protection ensures protection from strong jet water sprays and dust particles. The working temperature ranges from 0 to 40 degrees Celsius. MPL servo motors are offered in nine frame sizes that range from 63 and 75-millimeter frames to larger frames measuring 100 to 300 millimeters. High-energy rare-earth magnets are used in the MPL servo motors. This series of motors have power ratings ranging from 0.16 to 18.6 kilowatts, with some producing a speed of up to 8000 revolutions per minute (rev/min). Two-pole resolvers, 2000-line encoders, multi-turn encoding systems, and single-turn encoders using the Hiperface encoder protocol are among the available feedback options. Single-turn or multi-turn high-resolution encoders are standard on MP-series low-inertia motors. MPL motors are designed for use with Allen-Bradley controllers. The MP series has motors rated at 200 and 400 volts.

MPL Servo Motors

MPL (Low Inertia) servo motors from Allen Bradley are highly efficient and compact motors that are used for applications that demand motion sensitivity owing to significantly low rotor inertia. These motors have a high torque density (torque with respect to either weight or volume). These motors are brushless and are available in 9 different frame sizes. Premium permanent magnet is used in the construction of these motors. These servo motors are used with a range of Allen Bradley drive series (discussed later). MPL servo motors are ideally used for applications like assembling electronic components, packaging, material handling in different industries, automotive, and metal forming industries.

Mechanical and Electrical Specifications

Rotor and Rotor Magnets

MP Low Inertia servo motors are brushless AC motors. These motors are synchronous motors (recall the fact that magnet is present, no need for induction). For rotor flux production, their rotors are equipped with rare earth magnets which are premium in quality, and high in energy. These magnets pave way for quicker acceleration. Magnets on the rotors of MPL servo motors might have 8 different stack lengths (1 inch to 8 inch and corresponding codes as multiples of 10).

Rotors of these motors have threaded holes at their shaft end.

Stator Winding

Stator winding, which hugely decides the weight of the machine, is the major factor in determining torque and power density. To keep torque and power density high in MPL servo drives, stator winding is also made using innovative technology, and quality material is used for insulating this winding. Powerful rotor magnets and advanced stator windings make this motor provide 40% more torque (w.r.t. size) than conventional motors. This stator winding is also helpful in better heat management.

Motor Connectors and Cables

MPL servo motors can either have a connector that is a circular bayonet, and it faces a shaft (code 2) or these motors could come with a DIN connector that can rotate up to 180 degrees for ease of use. This connector is SpeedTec circular connector (code 7).

MPL servo motors also have brake (or power) connectors and feedback connectors as motion-sensitive applications need them. The supplier of this product will not provide auxiliary feedback, motor feedback, and I/O connector kits as accessories to the buyer.

Cables provided by the factory manufacturer will have standard length. These cables have appropriate sealing to ensure that the motor achieves promised environmental ratings as well as shield termination. These cables meet specifications and requirements of the following standards: NFPA 79 (National Fire Protection Association code 79) compliant, DESINA cable jacket coloring, tray cable rating, 600V insulation rating, RoHS and REACH, UL-Listed. Customers can also go with the option of designing their cables. For this purpose, kits are made available by Rockwell Automation. The construction of the cable would also affect the Electromagnetic Compatibility (EMC) of the system so extreme care is needed while constructing the cable. Shield of either type of cable would need grounding; it could be hazardous otherwise.

Allen Bradley directs its user that connector housings in the case of M40 and M23 can be rotated to make connector placement in a rearward direction. While connector housings for M58 must be removed physically and placed back in 90 degrees increments.

Shaft Seal

Not all servo motors of the MP Low inertia series come with a shaft seal. The user has to decide if, for some applications and the environment, a shaft seal is needed or not. The shaft seal will ensure that dust particles and moisture content does not enter motor bearings. Moreover, the type of use will also determine the frequency or duration of maintenance and replacement of shaft seals because these wear with time. Allen Bradley recommends users of these motors to inspect and maintain this component regularly – typically every 3 months but not to go beyond 12 months.

For these servo motors, nitrile is used to build shaft seals. For smooth operation of the shaft seal, a lubricant is included in the accessories package. To lubricate the shaft seal, the use of a shaft seal kit is recommended provided by Rockwell Automation. For different servo motors in the MPL series, different shaft seal kits are available, e.g., for motor catalog numbers MPL-A15xx and MPL-B15xx, the shaft seal kit with catalog number MPL-SSN-F63F75 is recommended, while for motor catalog numbers MPL-A3xx and MPL-B3xx, the shaft seal kit with the catalog number MPL-SSN-A3B3 is suggested, and so on. Furthermore, Rockwell Automation recommends its users use its shaft seals. If the owner uses shaft seals from any other company, then any sort of warranty (implied or direct) is not entertained by Rockwell Automation.

The presence or absence of a shaft seal will also determine which standards the product will comply with (discussed later in detail).

Mounting Dimensions

For MPL servo motors, the IEC72-1 standard for rotating electrical machines is complied with while making mounting dimensions. Indirectly, it covers frame numbers all from 56 to 400 and flange numbers ranging between 55 and 1080. Their mounting flanges have free mounting holes of type FF.

Frame Sizes

Allen Bradley has used novel design techniques (e.g. while designing stator winding, choosing winding insulation, placement of magnets, choice of magnets, etc.) to keep the size of MPL servo motors as low as possible. As mentioned, motors from this series of Allen Bradley products are available in nine different frame sizes – all being compact and sturdy. These frame sizes and the corresponding codes are as follows:

  • Code 15 indicates a frame size of 63 mm
  • Code 2 indicates a frame size of 75 mm
  • Code 3 indicates a frame size of 100 mm
  • Code 4 indicates a frame size of 115 mm
  • Code 45 indicates a frame size of 130 mm
  • Code 5 indicates a frames size of 165 mm
  • Code 6 indicates a frame size of 215 mm
  • Code 8 indicates a frame size of 265 mm
  • Code 9 indicates a frame size of 300 mm

Encoders and Feedback

Servo motors from the MPL series are used for those motion applications which require high performance. High-resolution encoders are also there to determine the accurate position of the rotor. Thus, these motors have efficient high-resolution feedback systems. This feedback could be either single turn (-E and –S) or multi-turn (-V and -M) through the encoder. In single turn feedback systems, the absolute position of the rotor is fed back to the controller in just one turn while maintaining high resolution. On the other hand, 4096 turns are needed to provide high-resolution feedback in multi-turn encoder systems. This feedback would also be the absolute position of the motor rotor.

 Motors with the –M and –S code can make up to two million counts in one revolution while motors with code –E and –V give up to two hundred and sixty counts in one revolution – all giving smooth performance.

Motors in the MPL series also have the option of an incremental encoder (with Code ‘H’) and resolver (with code ‘R’).

Brake Availability

MPL servo motors could either have a 24V DC brake (code 4) or no brake at all (code 2). If the brake is present, it will keep the motor shaft still or hold it at 0rpm (revolutions per minute) unless applied torque remains below the rated holding torque for the brake. Anyhow, this brake is not to bring the motor to a stop.

For disengaging this brake, a separate power source is needed. This power can be provided by a servo motor controller or an operator control which could be manual.

On-board Memory for Commissioning

To know motor parameters, the system doesn’t need to perform commissioning of these MPL servo motors from scratch. Instead, these motors are equipped with a memory unit to store the identity of the motor. So, upon startup, the system could identify motor, and commissioning time could be reduced significantly.

Voltage Class

Motors from the MPL series are grouped into two classes based on operating voltage: 200V class and 400V class. In the catalog number MPL-xxxxxx-xx7xAA, the first 'x' is to distinguish between voltage classes. Because of two options for voltage, A is for 200V class of motors and B is that for 400V class motors.

Compatibility for Drives

The motor, being the crucial part of a drive system, needs to be designed while considering application requirements and characteristics of other components in the drive system. In other words, the motor’s compatibility with the drive should be kept in mind. MP Low inertia servo motors are compatible with the following Allen Bradley drive systems: Kinetix 5500, Kinetix 6200, Kinetix 6500, Kinetix 6000, Kinetix 300, Kinetix 350, Kinetix 2000, Kinetix 7000, and Ultra3000.

Torque Output

Servo motors from the MPL series give its users a wide range of options for torque. Different motors from this series are capable of providing continuous stall torque in the range of 0.26 to 163Nm while peak stall torque goes up to 278Nm (e.g. catalog number MPL-B980B) starting from 0.77Nm (e.g. catalog number MPL-A1510V). Servo motors in MP Low inertia series give 40% higher torque output than that of other servo motors of the same size.

Speed Output

Servo motors of the MP Low Inertia series can attain speed up to 8000 rpm (revolutions per Minute). Other available options for rated speeds and respective codes are given below.

  • Code B indicates a rated speed of 1000 rpm
  • Code C indicates a rated speed of 1500 rpm
  • Code D indicates a rated speed of 2000 rpm
  • Code F indicates a rated speed of 3000 rpm
  • Code H indicates a rated speed of 3500 rpm
  • Code J indicates a rated speed of 3750 rpm
  • Code K indicates a rated speed of 4000 rpm
  • Code P indicates a rated speed of 5000 rpm
  • Code Y indicates a rated speed of 6000 rpm
  • Code U indicates a rated speed of 7000 rpm
  • Code V indicates a rated speed of 8000 rpm

Power Output

Like torque, motors in MP Low inertia series have higher power density as well. Rated output (in kW) at respective rated speed can go up to 18.6kW (e.g., motor catalog number MPL-B980D) starting from a small figure of 0.16kW (e.g., motor catalog number MPL-A1510V).

Environmental Specifications

Rockwell Automation has made low inertia servo motors of the MPL series compatible with IP50 or IP66 depending upon the absence or presence of a shaft seal. If there is no shaft seal then the motor follows the IP50 standard minimum (typically IP50 if the shaft is mounted in an upward direction, IP51 if the shaft is installed in a horizontal direction, and IP53 if the shaft is installed in a downward direction). If there is a shaft seal (optional) then the IP66 standard is mandatory (so concerned equipment becomes dust and drip-free). Furthermore, the manufacturer binds its users to use those cable connectors which are environmentally sealed.

As far as the operating temperature is concerned, these servo motors are recommended to be used in the locality where the temperature ranges between 0 and 40 degrees centigrade. Anyhow, storage temperature can range between -30 and 70 degrees centigrade. If the temperature doesn’t remain within prescribed limits, then the owner must make arrangements for enough clearance, airflow, and heatsink.

While storing it must be ensured that the atmosphere is noncorrosive. Relative humidity at the storage site could be anywhere between 5 and 95% noncondensing.

Thermal Management

MPL series servo motors are designed to be smaller in size which complicates the heat management system. But advanced winding techniques, winding insulation, and winding material make this motor thermally efficient. Moreover, the presence of magnets instead of another winding also makes these motors more efficient thermally. During the designing process, heat transfer is also paid heed to. Anyhow, the manufacturer suggests not enclosing the motor except in situations when a forced-air mechanism is used to cool down the motor. It is also suggested that no such devices are placed near motors that produce heat. Aluminum heatsinks can also be used to dissipate heat more efficiently.

Certifications

MP Low inertia servo motors are components that are UL Recognized to corresponding CSA and UL standards. These servo motors are also CE marked for all applicable directives.

Other Products of the MP Series

Low inertia motors are regarded as one product of the MP series, as there are two more products of the MP series as well. These are MP series food-grade motors and stainless-steel motors. These two types of products are designed to meet some extra application requirements.

MP series food grade motors mainly possess characteristics of MP Low inertia motors but they also meet additional requirements of food and beverage related applications e.g. packaging. These motors are designed to have better sealing and food-grade coatings so they could be used near food items. Similarly, MP series stainless steel motors are designed to work in hygienic environments. These motors can be used safely in dairy and poultry-related applications where there could be a corrosive atmosphere or high pressure. These motors are ensured to be leakproof and they are factory sealed to achieve this purpose.

Browse our selection of MPL Servo Motors units

AutomationStop.com's online catalog offers one of the largest selections of preowned MPL Servo Motors units in the world.

MPL-B320P-RK74AA

Product number MPL-B320P-RK74AA is a low-inertia servo motor manufactured by Allen Bradley. This motor operates via a 400-volt AC voltage. This motor also operates at a speed of 5000 rev/min. The frame of this product measures 100 millimeters, and the magnet stack measures 2.0 inches. The MPL-B320P-RK74AA servo motor features a 2-pole resolver, a 24-volt DC brake, and circular DIN connectors.

MPL-B320P-SJ22AA

Product number MPL-B320P-SJ22AA is an Allen Bradley servo motor. This unit belongs to the MP series of servo motors, and it has low inertia. The MPL-B320P-SJ22AA has a 400-volt rated voltage. Additionally, the rated speed of this servo motor is 5000 revolutions per minute. For feedback, the MPL-B320P-SJ22AA has an integrated high-resolution single-turn encoder.

MPL-B320P-SJ24AA

Catalog number MPL-B320P-SJ24AA is an MP-series low-inertia servo motor. It has a 400 VAC voltage rating and a 5000 r/min speed rating. The MPL-B320P-SJ24AA servo motor has a 100-millimeter-sized frame and a 2.0-inch-long magnet stack. This servo motor features a single-turn encoder, 24 VDC brakes, and a mounting flange.

MPL-B320P-SJ72AA

Part number MPL-B320P-SJ72AA is a brushless servo motor from Allen Bradley. This unit has a 400-volt voltage rating and low inertia. The MPL-B320P-SJ72AA's rated operational speed is 5000 rev/min. The frame size of this servo motor is 100 millimeters. Additionally, the length of the MPL-B320P-SJ72AA's magnetic stack is two inches. This product features a single-turn encoder and circular DIN connectors.

MPL-B320P-SJ74AA

Product number MPL-B320P-SJ74AA is a low-inertia servo motor from Allen Bradley. This device has a 400 VAC voltage rating, in addition to a 5000 rev/min speed rating. This servo motor has a frame that measures 100 millimeters, along with a magnetic stack that measures 2.0 inches. The MPL-B320P-SJ74AA includes a single-turn encoder for feedback purposes. This motor has circular DIN connectors and 24 VDC brakes.

MPL-B320P-SK22AA

The Allen Bradley MPL-B320P-SK22AA is a low-inertia brushless servo motor. It has a maximum speed of 5000 revolutions per minute (RPM). This unit has a 100 mm frame size. There is no shaft key or shaft seal available with this unit. The MPL-B320P-SK22AA servo motor has single-turn absolute feedback.

MPL-B320P-SK24AA

The MPL-B320P-SK24AA from Allen Bradley is a low-inertia servo motor with a 400-volt AC voltage rating. This unit can operate at speeds rated up to 5000 r/min. This motor has a 100 mm frame, in addition to a 2.0 in. magnet stack. A single-turn encoder is utilized by the MPL-B320P-SK24AA for feedback purposes. This servo motor features 24-volt DC brakes and circular bayonet connectors.

MPL-B330P-MK22AA

Part number MPL-B330P-MK22AA is an MP-series low-inertia servo motor manufactured by Allen Bradley. This device operates at a 5000-revolution per minute (rpm) rated speed. This servo motor includes a frame measuring 100 millimeters and a magnet stack measuring three inches. The MPL-B330P-MK22AA utilizes a multi-turn high-resolution encoder for feedback purposes. This product has circular bayonet connectors and a mounting flange.

MPL-B330P-MK24AA

Product number MPL-B330P-MK24AA is a low inertia servo motor that was manufactured by Allen Bradley. This device has a voltage rating of 400 VAC. The MPL-B330P-MK24AA's frame measures one hundred (100) millimeters, while the magnetic stack has a length measuring three (3.0) inches. For feedback purposes, this device features a multi-turn encoder with a high resolution. In addition to that, the MPL-B330P-MK24AA features a 24 VDC brake. This servo motor may be mounted via a flange mount.

MPL-B330P-MK72AA

Product number MPL-B330P-MK72AA is a low-inertia servo motor. This unit was produced by Allen Bradley. This motor requires a voltage of 460 VAC to operate. It has a 100-millimeter-sized frame, as well as a 3.0-inch magnetic stack. The speed of this servo motor is rated as 5000 rev/min. It features a circular DIN connector that is orientated at a right angle. Additionally, this connector may be rotated up to 180 degrees.

MPL-B330P-MK74AA

Product number MPL-B330P-MK74AA is a low-inertia servo motor. It was designed and produced by Allen Bradley/Rockwell Automation, and it belongs to the MP line of servo motors. This unit operates at speeds of up to 5000 revolutions per minute. Additionally, the MPL-B330P-MK74AA has a 100-millimeter-sized frame. The voltage rating of this servo motor is 400 volts alternating current (AC).

MPL-B330P-RJ22AA

The Allen Bradley MPL-B330P-RJ22AA is a low-inertia servo motor. This unit has a 400 VAC voltage rating and a 5000 rpm speed rating. This servo motor's frame measures 100 mm, and its magnet stack measures three (3.0) inches. The MPL-B330P-RJ22AA features a 2-pole resolver for feedback purposes. This servo motor is suitable for use in applications that require speed or motion control.

MPL-B330P-RJ24AA

The MPL-B330P-RJ24AA MP-series servo motor was produced by Allen Bradley. It has low inertia and a 400 VAC voltage rating. This servo motor operates at speeds rated up to 5000 rpm. The frame of this motor measures 100 millimeters, and the magnetic stack measures three inches. The MPL-B330P-RJ24AA utilizes a 2-pole resolver for feedback purposes. This servo motor has circular bayonet connectors and 24 VDC brakes.

MPL-B330P-RJ72AA

Product number MPL-B330P-RJ72AA is an MP-series low-inertia servo motor. This unit was manufactured by Allen Bradley. It has a 400-volt rating, in addition to a 5000 r/min speed rating. The frame of this motor measures 100 millimeters. Additionally, the magnetic stack of the MPL-B330P-RJ72AA measures three inches. For feedback purposes, this servo motor utilizes a 2-pole resolver. The MPL-B330P-RJ72AA features circular DIN connectors and a mounting flange.

MPL-B330P-RJ74AA

Catalog number MPL-B330P-RJ74AA is a product of Allen Bradley. This product is an MP-series low-inertia servo motor with a 400-volt AC voltage rating and a 5000 rpm speed rating. This motor features a 100-millimeter frame, in addition to a three-inch-long magnetic stack. A 2-pole resolver is utilized by the MPL-B330P-RJ74AA for feedback purposes. This servo motor includes circular DIN connectors and 24-volt DC brakes.

MPL-B330P-RK22AA

The MPL-B330P-RK22AA from Allen Bradley is an MP-series low-inertia servo motor. This motor is powered via a 400-volt AC-rated voltage. Additionally, the MPL-B330P-RK22AA operates at a rated speed of 5000 r/min. The frame of this product measures 100 millimeters, and its magnetic stack measures 3.0 inches. The MPL-B330P-RK22AA features a 2-pole resolver for feedback purposes. This servo motor also features circular bayonet connectors and a mounting flange.

MPL-B330P-RK24AA

Catalog number MPL-B330P-RK24AA is an Allen Bradley servo motor. This motor has low inertia and a 400 VAC voltage rating. Additionally, this servo motor is capable of operating at a rated speed of 5000 revolutions per minute. The frame of this product measures 100 millimeters, and the magnetic stack measures 3.0 inches. The MPL-B330P-RK24AA features a 2-pole resolver, 24 VDC brakes, and circular bayonet connectors.

MPL-B330P-RK72AA

Manufactured by Allen Bradley, part number MPL-B330P-RK72AA is a 400-volt servo motor with low inertia. It has a 100 mm frame and a 3.0 in. magnet stack. The MPL-B330P-RK72AA operates at speeds rated up to 5000 rev/min. Feedback is provided to this servo motor via a 2-pole resolver. This device can be mounted using a mounting flange.

MPL-B330P-RK74AA

Product number MPL-B330P-RK74AA is a 400-volt servo motor with low inertia. This unit has a rated operating speed of 5000 r/min. A 2-pole resolver is utilized by this servo motor for feedback purposes. The MPL-B330P-RK74AA has circular DIN connectors and a 24-volt DC brake. A mounting flange may be used to mount this motor.

MPL-B330P-SJ22AA

Catalog number MPL-B330P-SJ22AA is a 400-volt low-inertia servo motor. This unit was produced by Allen Bradley as part of the MP series of servo motors. The MPL-B330P-SJ22AA has a 100-millimeter frame. This motor also has a 3.0-inch-long magnetic stack. The speed at which the MPL-B330P-SJ22AA operates is rated up to 5000 rev/min. This servo motor can be mounted using a flange mount.

MPL-B330P-SJ24AA

Product number MPL-B330P-SJ24AA is an MP-series servo motor with no inertia and a 400-volt rating. This servo motor has a single-turn encoder, a shaft key, and a circular bayonet connector. The MPL-B330P-SJ24AA also has a 24-volt DC dynamic brake and an IEC metric mounting flange. The rated speed of this servo motor is 5000 rev/min.

MPL-B330P-SJ72AA

Product number MPL-B330P-SJ72AA is an MP-series low-inertia servo motor that was produced by Allen Bradley/Rockwell Automation. This unit has a 400 VAC voltage rating. Additionally, the frame of this motor measures 100 millimeters, and the length of the magnetic stack measures 3.0 inches. The MPL-B330P-SJ72AA operates at 5000 revolutions per minute. This servo motor can be mounted by using a flange mount.

MPL-B330P-SJ74AA

Catalog number MPL-B330P-SJ74AA is a 400-volt low-inertia servo motor belonging to the MP-series of servo motors. This device has a 100 mm sized frame, in addition to a 3.0 in. long magnetic stack. This servo motor operates at a speed rated at 5000 revolutions per minute. The MPL-B330P-SJ74AA has a 24-volt DC brake integrated into its design.

MPL-B330P-SK22AA

The Allen Bradley MPL-B330P-SK22AA is a low-inertia servo motor with a 400-volt rating. This motor operates at speeds rated up to 5000 revolutions per minute. The MPL-B330P-SK22AA has a 100 mm frame. It also has a 3.0 in. magnetic stack. Feedback is provided to this servo motor via a single-turn encoder. This unit has circular bayonet connectors. The MPL-B330P-SK22AA is capable of being mounted via a mounting flange.

MPL-B330P-SK24AA

Produced by Allen Bradley, product number MPL-B330P-SK24AA is a low-inertia servo motor. This device has a voltage rating of 400 volts. The frame size of the MPL-B330P-SK24AA is 100 millimeters, and its magnetic stack is 3.0 inches. This Allen Bradley servo motor operates at speeds rated up to 5000 rev/min. The MPL-B330P-SK24AA has a single-turn encoder, a 24-volt DC brake, and a mounting flange.

MPL-B330P-SK72AA

Catalog number MPL-B330P-SK72AA is an Allen Bradley servo motor with low inertia and a voltage rating of 400 volts. The frame of this motor measures 100 millimeters. Additionally, its magnetic stack measures 3.0 inches long. The MPL-B330P-SK72AA operates at a rated speed of 5000 rev/min. This servo motor has a single-turn encoder and a mounting flange.

MPL-B330P-SK74AA

Product number MPL-B330P-SK74AA is a low-inertia servo motor manufactured by Allen Bradley. This device has a 400 VAC voltage rating. This unit's frame measures 100 millimeters, and its magnetic stack measures 3.0 inches. The MPL-B330P-SK74AA servo motor operates at speeds rated up to 5000 rev/min. This motor includes a single-turn encoder, a 24 VDC brake, circular DIN connectors, and a mounting flange.

MPL-B420P-HJ24AA

Part number MPL-B420P-HJ24AA is a 400-volt AC, low-inertia servo motor. This device was designed and produced by Allen Bradley, and it is part of the MP series of servo motors. The MPL-B420P-HJ24AA has a frame measuring 115 mm, as well as a magnetic stack with a length measuring 2.0 in. This unit has a 5000 rpm rated speed. The MPL-B420P-HJ24AA includes an integrated 2000-line encoder. It also has a 24 VDC brake integrated into its design. This product can be mounted by using a flange mount.

MPL-B420P-MJ22AA

The MPL-B420P-MJ22AA 400-volt low-inertia servo motor was produced by Allen Bradley. This unit is part of the MP series of servo motors. The MPL-B420P-MJ22AA has a 75-millimeter frame, as well as a 2.0-inch magnet stack. The rated operating speed of the MPL-B420P-MJ22AA is 5000 revolutions per minute. A high-resolution encoder provides this servo motor feedback in multiple turns.

MPL-B420P-MJ24AA

Catalog number MPL-B420P-MJ24AA is a low-inertia servo motor with a 400-volt AC voltage rating. This motor was designed by Allen-Bradley as part of the MP family of products. This unit is capable of operating at a 5000 rpm rated speed. The MPL-B420P-MJ24AA has a 115-millimeter frame, along with a 2.0-inch-long magnetic stack. For feedback purposes, this servo motor includes a multi-turn encoder. The MPL-B420P-MJ24AA also includes circular bayonet connectors and 24-volt DC brakes.

MPL-B420P-MJ72AA

Part number MPL-B420P-MJ72AA is a low inertia servo motor with a 400-volt rating. This device was designed and produced by Allen Bradley. It has a frame size of 115 millimeters, as well as a magnetic stack with a length of 2.0 inches. The speed rating of the MPL-B420P-MJ72AA servo motor is 5000 r/min. This unit is equipped with a circular DIN connector, which is orientated at a right angle and is capable of rotating up to 180 degrees. The MPL-B420P-MJ72AA can be mounted via a flange mount.

MPL-B420P-MJ74AA

Catalog number MPL-B420P-MJ74AA is an MP-series low-inertia servo motor from Allen Bradley. This unit operates at speeds of up to 5000 rev/min. Additionally, the voltage rating of this motor is 400 volts AC. The MPL-B420P-MJ74AA includes a multi-turn encoder for feedback, as well as circular DIN connectors. Also included in this unit is a brake rated at 24 volts DC. The MPL-B420P-MJ74AA is flange mountable.

MPL-B420P-MK22AA

Part number MPL-B420P-MK22AA is a low-inertia servo motor from Allen Bradley. It is powered via a 400-volt AC voltage. Additionally, this motor operates at 5000 revolutions per minute. The frame of this motor measures 115 millimeters, and the magnetic stack measures 2.0 inches. The MPL-B420P-MK22AA is equipped with a multi-turn encoder for feedback purposes. It has circular bayonet connectors and a mounting flange.

MPL-B420P-MK24AA

The MPL-B420P-MK24AA servo motor from Allen Bradley has low inertia and a 400 VAC voltage rating. This product operates at a 5000-revolution per minute rated speed. This servo motor's frame measures 115 millimeters, and its magnetic stack measures two inches. The MPL-B420P-MK24AA features a multi-turn encoder for feedback purposes. Furthermore, this servo motor has circular bayonet connectors and 24-volt DC brakes.

MPL-B420P-MK72AA

Catalog number MPL-B420P-MK72AA is a 400-volt low-inertia servo motor from Allen Bradley. This motor has a frame that measures 115 millimeters, in addition to a magnetic stack that measures two inches. The speed at which this servo motor operates is rated as 5000 revolutions per minute. The MPL-B420P-MK72AA servo motor includes a multi-turn encoder for feedback purposes. This device also features circular DIN connectors.

MPL-B420P-MK74AA

Designed by Allen Bradley, part number MPL-B420P-MK74AA is a low-inertia servo motor with a voltage rating of 400 volts AC. This motor operates at 5000 revolutions per minute. The frame of this servo motor measures 115 millimeters. In addition, the magnetic stack of this product measures 2.0 inches. A multi-turn high-resolution encoder is utilized by the MPL-B420P-MK74AA for feedback purposes. This product features circular DIN connectors and a 24-volt DC brake.

MPL-B420P-RJ22AA

Allen Bradley designed and produced the MPL-B420P-RJ22AA low-inertia servo motor. This device operates at a 400-volt AC-rated voltage, as well as at a 5000 rpm rated speed. This motor has a 115-millimeter frame, in addition to a 2.0-inch-long magnetic stack. For feedback purposes, the MPL-B420P-RJ22AA servo motor is equipped with a 2-pole resolver. It has circular bayonet connectors and a mounting flange.

MPL-B420P-RJ24AA

Part number MPL-B420P-RJ24AA is a servo motor from Allen Bradley's MP series of products. This motor has low inertia and operates via a 400-volt AC-rated voltage. Additionally, this servo motor operates at a rated speed of 5000 rev/min. The frame of this motor measures 115 millimeters, and the magnetic stack measures 2.0 inches. The MPL-B420P-RJ24AA servo motor is equipped with a 2-pole resolver for feedback purposes. This product has circular bayonet connectors and a 24-volt DC brake.

MPL-B420P-RJ72AA

Catalog number MPL-B420P-RJ72AA is a low-inertia servo motor that was produced by Allen Bradley. This unit has a 400-volt AC voltage rating, as well as a 5000 rpm speed rating. The frame of this motor measures 115 millimeters, and the magnet stack measures 2.0 inches. For feedback purposes, the MPL-B420P-RJ72AA features a 2-pole resolver. This device has circular DIN connectors and a flange for mounting. The MPL-B420P-RJ72AA can be utilized in speed control or motion control applications.

MPL-B420P-RJ74AA

Product number MPL-B420P-RJ74AA is a 400-volt AC servo motor with low inertia. This device operates at a rated speed of 5000 revolutions per minute. The frame of this product measures 115 millimeters, and the magnet stack measures 2.0 inches. The MPL-B420P-RJ74AA is equipped with a 2-pole resolver for feedback purposes. It has circular DIN connectors and 24-volt DC brakes. This servo motor can be mounting via a mounting flange.

MPL-B420P-RK22AA

Catalog number MPL-B420P-RK22AA is a low-inertia servo motor with a 400-volt AC voltage rating. It has a 115-millimeter frame and a 2.0-inch-long magnet stack. The operating speed of this servo motor is rated at 5000 rev/min. For feedback purposes, the MPL-B420P-RK22AA includes a 2-pole resolver. This product has circular bayonet connectors and a mounting flange. The MPL-B420P-RK22AA is suitable for use in speed control or motion control applications.

MPL-B420P-RK24AA

Product number MPL-B420P-RK24AA is an Allen Bradley low-inertia servo motor. This device operates via a 400-volt AC voltage rating. This motor also operates at a rated speed of 5000 rpm. The frame of this product measures 115 millimeters, and its magnetic stack measures two inches. For feedback purposes, the MPL-B420P-RK24AA servo motor includes a 2-pole resolver. This device has circular bayonet connectors and a 24-volt DC brake.

MPL-B420P-RK72AA

Produced by Allen Bradley, product number MPL-B420P-RK72AA is a low-inertia servo motor with a 400-volt AC voltage rating. This motor operates at a rated speed of 5000 rev/min. This servo motor's frame measures 115 millimeters. Additionally, its magnetic stack measures 2.0 inches. For feedback purposes, the MPL-B420P-RK72AA servo motor is equipped with a 2-pole resolver. This device features circular DIN connectors and a mounting flange.

MPL-B420P-RK74AA

Designed and produced by Allen Bradley, part number MPL-B420P-RK74AA is a low-inertia servo motor. This device is powered via a 400 VAC rated voltage. In addition, this servo motor can operate at a rated speed of 5000 rev/min. This motor has a frame that measures 115 millimeters, as well as a magnet stack that measures 2.0 inches. For feedback purposes, the MPL-B420P-RK74AA servo motor is equipped with a 2-pole resolver. The connectors of this product are circular DIN connectors.

MPL-B420P-SJ22AA

Catalog number MPL-B420P-SJ22AA is a servo motor from the MP series of Allen Bradley servo motors. This is a 400-volt servo motor with speeds rated at 5000 rev/min. The frame of this device measures 115 millimeters. Additionally, the length of the magnetic stack measures 2.0 inches. The MPL-B420P-SJ22AA servo motor has a single-turn encoder for feedback purposes, as well as an IEB metric flange.

MPL-B420P-SJ24AA

The Allen Bradley MPL-B420P-SJ24AA is a low-inertia servo motor with a 400-volt AC voltage rating. This product operates at a rated speed of 5000 rev/min. The MPL-B420P-SJ24AA has a 115-millimeter frame, as well as a 2.0-inch-long magnetic stack. This servo motor is equipped with a high-resolution encoder that can provide feedback in a single turn. The MPL-B420P-SJ24AA has circular bayonet connectors and 24-volt DC brakes.

MPL-B420P-SJ72AA

Designed and produced by Allen-Bradley, catalog number MPL-B420P-SJ72AA is a rotary servo motor with low inertia. This unit belongs to Allen-Bradley's MP line of servo motors. The MPL-B420P-SJ72AA has a 400-volt alternating current (AC) voltage rating. Additionally, it operates at speeds rated up to 5000 revolutions per minute. The frame of this device measures 115 millimeters. In addition, the length of the MPL-B420P-SJ72AA's magnetic stack measures two (2.0) inches. This servo motor features a single-turn encoder and circular DIN connectors. The MPL-B420P-SJ72AA is suitable for applications requiring motion and position control.

MPL-B420P-SJ74AA

Catalog number MPL-B420P-SJ74AA is a low inertia servo motor from Allen Bradley. This unit has a 400-volt voltage rating. The frame of the MPL-B420P-SJ74AA is 115 millimeters, in addition to the magnetic stack having a length of 2.0 inches. This servo motor operates at a rated speed of 5000 r/min. Integrated into the MPL-B420P-SJ74AA is a single-turn encoder. This motor also has an integrated brake rated at 24 volts direct current (DC).

MPL-B420P-SK22AA

Product number MPL-B420P-SK22AA is a servo motor with low inertia and a 400-volt AC-rated voltage. This servo motor operates at a rated speed of 5000 revolutions per minute. This product has a frame that measures 115 millimeters, along with a magnetic stack that measures 2.0 inches. A single-turn encoder is utilized by this servo motor for feedback purposes. The MPL-B420P-SK22AA has circular bayonet connectors and a flange for mounting purposes.

MPL-B420P-SK24AA

Catalog number MPL-B420P-SK24AA is a servo motor that was designed and produced by Allen Bradley. This unit has a 400-volt AC-rated voltage, as well as low inertia. The frame of this device measures 115 millimeters, and the magnetic stack measures 2.0 inches. The rated operating speed of this product is 5000 rev/min. The MPL-B420P-SK24AA is equipped with a single-turn encoder for feedback purposes. This unit has circular bayonet connectors and 24-volt DC brakes.
Previous 1

...

6

7

8

...

12 Next

Displaying 50 of 573 results.

Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.

Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

TOP