GE / IP FANUC Series 90/30 In Stock

Email

sales@automationstop.com

Call Now

(919) 867-5794

Mon-Fri 8AM-5PM EST

Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.

Allen Bradley - Motors

MPL Servo Motors

The MPL series consists of low-inertia rotary servo motors with premium permanent magnets that are manufactured by Allen-Bradley. These servo motors are designed to fulfill the stringent requirements of various motion systems. The MP-series motors come with a mounting pilot to help operators mount the motor in a system. These motor units have a high torque-to-size ratio, innovative winding technology, good torque performance, rapid acceleration, and the ability to operate with a sustained shaft load. They are appropriate for use in a variety of industries and applications, including handling of materials, automotive, and conversion-type applications. Winding insulating materials are used in each MPL servo motor to improve thermal management. The installation adheres to all local rules and installation standards that improve safety and electromagnetic compatibility, and its IP66 protection ensures protection from strong jet water sprays and dust particles. The working temperature ranges from 0 to 40 degrees Celsius. MPL servo motors are offered in nine frame sizes that range from 63 and 75-millimeter frames to larger frames measuring 100 to 300 millimeters. High-energy rare-earth magnets are used in the MPL servo motors. This series of motors have power ratings ranging from 0.16 to 18.6 kilowatts, with some producing a speed of up to 8000 revolutions per minute (rev/min). Two-pole resolvers, 2000-line encoders, multi-turn encoding systems, and single-turn encoders using the Hiperface encoder protocol are among the available feedback options. Single-turn or multi-turn high-resolution encoders are standard on MP-series low-inertia motors. MPL motors are designed for use with Allen-Bradley controllers. The MP series has motors rated at 200 and 400 volts.

MPL Servo Motors

MPL (Low Inertia) servo motors from Allen Bradley are highly efficient and compact motors that are used for applications that demand motion sensitivity owing to significantly low rotor inertia. These motors have a high torque density (torque with respect to either weight or volume). These motors are brushless and are available in 9 different frame sizes. Premium permanent magnet is used in the construction of these motors. These servo motors are used with a range of Allen Bradley drive series (discussed later). MPL servo motors are ideally used for applications like assembling electronic components, packaging, material handling in different industries, automotive, and metal forming industries.

Mechanical and Electrical Specifications

Rotor and Rotor Magnets

MP Low Inertia servo motors are brushless AC motors. These motors are synchronous motors (recall the fact that magnet is present, no need for induction). For rotor flux production, their rotors are equipped with rare earth magnets which are premium in quality, and high in energy. These magnets pave way for quicker acceleration. Magnets on the rotors of MPL servo motors might have 8 different stack lengths (1 inch to 8 inch and corresponding codes as multiples of 10).

Rotors of these motors have threaded holes at their shaft end.

Stator Winding

Stator winding, which hugely decides the weight of the machine, is the major factor in determining torque and power density. To keep torque and power density high in MPL servo drives, stator winding is also made using innovative technology, and quality material is used for insulating this winding. Powerful rotor magnets and advanced stator windings make this motor provide 40% more torque (w.r.t. size) than conventional motors. This stator winding is also helpful in better heat management.

Motor Connectors and Cables

MPL servo motors can either have a connector that is a circular bayonet, and it faces a shaft (code 2) or these motors could come with a DIN connector that can rotate up to 180 degrees for ease of use. This connector is SpeedTec circular connector (code 7).

MPL servo motors also have brake (or power) connectors and feedback connectors as motion-sensitive applications need them. The supplier of this product will not provide auxiliary feedback, motor feedback, and I/O connector kits as accessories to the buyer.

Cables provided by the factory manufacturer will have standard length. These cables have appropriate sealing to ensure that the motor achieves promised environmental ratings as well as shield termination. These cables meet specifications and requirements of the following standards: NFPA 79 (National Fire Protection Association code 79) compliant, DESINA cable jacket coloring, tray cable rating, 600V insulation rating, RoHS and REACH, UL-Listed. Customers can also go with the option of designing their cables. For this purpose, kits are made available by Rockwell Automation. The construction of the cable would also affect the Electromagnetic Compatibility (EMC) of the system so extreme care is needed while constructing the cable. Shield of either type of cable would need grounding; it could be hazardous otherwise.

Allen Bradley directs its user that connector housings in the case of M40 and M23 can be rotated to make connector placement in a rearward direction. While connector housings for M58 must be removed physically and placed back in 90 degrees increments.

Shaft Seal

Not all servo motors of the MP Low inertia series come with a shaft seal. The user has to decide if, for some applications and the environment, a shaft seal is needed or not. The shaft seal will ensure that dust particles and moisture content does not enter motor bearings. Moreover, the type of use will also determine the frequency or duration of maintenance and replacement of shaft seals because these wear with time. Allen Bradley recommends users of these motors to inspect and maintain this component regularly – typically every 3 months but not to go beyond 12 months.

For these servo motors, nitrile is used to build shaft seals. For smooth operation of the shaft seal, a lubricant is included in the accessories package. To lubricate the shaft seal, the use of a shaft seal kit is recommended provided by Rockwell Automation. For different servo motors in the MPL series, different shaft seal kits are available, e.g., for motor catalog numbers MPL-A15xx and MPL-B15xx, the shaft seal kit with catalog number MPL-SSN-F63F75 is recommended, while for motor catalog numbers MPL-A3xx and MPL-B3xx, the shaft seal kit with the catalog number MPL-SSN-A3B3 is suggested, and so on. Furthermore, Rockwell Automation recommends its users use its shaft seals. If the owner uses shaft seals from any other company, then any sort of warranty (implied or direct) is not entertained by Rockwell Automation.

The presence or absence of a shaft seal will also determine which standards the product will comply with (discussed later in detail).

Mounting Dimensions

For MPL servo motors, the IEC72-1 standard for rotating electrical machines is complied with while making mounting dimensions. Indirectly, it covers frame numbers all from 56 to 400 and flange numbers ranging between 55 and 1080. Their mounting flanges have free mounting holes of type FF.

Frame Sizes

Allen Bradley has used novel design techniques (e.g. while designing stator winding, choosing winding insulation, placement of magnets, choice of magnets, etc.) to keep the size of MPL servo motors as low as possible. As mentioned, motors from this series of Allen Bradley products are available in nine different frame sizes – all being compact and sturdy. These frame sizes and the corresponding codes are as follows:

  • Code 15 indicates a frame size of 63 mm
  • Code 2 indicates a frame size of 75 mm
  • Code 3 indicates a frame size of 100 mm
  • Code 4 indicates a frame size of 115 mm
  • Code 45 indicates a frame size of 130 mm
  • Code 5 indicates a frames size of 165 mm
  • Code 6 indicates a frame size of 215 mm
  • Code 8 indicates a frame size of 265 mm
  • Code 9 indicates a frame size of 300 mm

Encoders and Feedback

Servo motors from the MPL series are used for those motion applications which require high performance. High-resolution encoders are also there to determine the accurate position of the rotor. Thus, these motors have efficient high-resolution feedback systems. This feedback could be either single turn (-E and –S) or multi-turn (-V and -M) through the encoder. In single turn feedback systems, the absolute position of the rotor is fed back to the controller in just one turn while maintaining high resolution. On the other hand, 4096 turns are needed to provide high-resolution feedback in multi-turn encoder systems. This feedback would also be the absolute position of the motor rotor.

 Motors with the –M and –S code can make up to two million counts in one revolution while motors with code –E and –V give up to two hundred and sixty counts in one revolution – all giving smooth performance.

Motors in the MPL series also have the option of an incremental encoder (with Code ‘H’) and resolver (with code ‘R’).

Brake Availability

MPL servo motors could either have a 24V DC brake (code 4) or no brake at all (code 2). If the brake is present, it will keep the motor shaft still or hold it at 0rpm (revolutions per minute) unless applied torque remains below the rated holding torque for the brake. Anyhow, this brake is not to bring the motor to a stop.

For disengaging this brake, a separate power source is needed. This power can be provided by a servo motor controller or an operator control which could be manual.

On-board Memory for Commissioning

To know motor parameters, the system doesn’t need to perform commissioning of these MPL servo motors from scratch. Instead, these motors are equipped with a memory unit to store the identity of the motor. So, upon startup, the system could identify motor, and commissioning time could be reduced significantly.

Voltage Class

Motors from the MPL series are grouped into two classes based on operating voltage: 200V class and 400V class. In the catalog number MPL-xxxxxx-xx7xAA, the first 'x' is to distinguish between voltage classes. Because of two options for voltage, A is for 200V class of motors and B is that for 400V class motors.

Compatibility for Drives

The motor, being the crucial part of a drive system, needs to be designed while considering application requirements and characteristics of other components in the drive system. In other words, the motor’s compatibility with the drive should be kept in mind. MP Low inertia servo motors are compatible with the following Allen Bradley drive systems: Kinetix 5500, Kinetix 6200, Kinetix 6500, Kinetix 6000, Kinetix 300, Kinetix 350, Kinetix 2000, Kinetix 7000, and Ultra3000.

Torque Output

Servo motors from the MPL series give its users a wide range of options for torque. Different motors from this series are capable of providing continuous stall torque in the range of 0.26 to 163Nm while peak stall torque goes up to 278Nm (e.g. catalog number MPL-B980B) starting from 0.77Nm (e.g. catalog number MPL-A1510V). Servo motors in MP Low inertia series give 40% higher torque output than that of other servo motors of the same size.

Speed Output

Servo motors of the MP Low Inertia series can attain speed up to 8000 rpm (revolutions per Minute). Other available options for rated speeds and respective codes are given below.

  • Code B indicates a rated speed of 1000 rpm
  • Code C indicates a rated speed of 1500 rpm
  • Code D indicates a rated speed of 2000 rpm
  • Code F indicates a rated speed of 3000 rpm
  • Code H indicates a rated speed of 3500 rpm
  • Code J indicates a rated speed of 3750 rpm
  • Code K indicates a rated speed of 4000 rpm
  • Code P indicates a rated speed of 5000 rpm
  • Code Y indicates a rated speed of 6000 rpm
  • Code U indicates a rated speed of 7000 rpm
  • Code V indicates a rated speed of 8000 rpm

Power Output

Like torque, motors in MP Low inertia series have higher power density as well. Rated output (in kW) at respective rated speed can go up to 18.6kW (e.g., motor catalog number MPL-B980D) starting from a small figure of 0.16kW (e.g., motor catalog number MPL-A1510V).

Environmental Specifications

Rockwell Automation has made low inertia servo motors of the MPL series compatible with IP50 or IP66 depending upon the absence or presence of a shaft seal. If there is no shaft seal then the motor follows the IP50 standard minimum (typically IP50 if the shaft is mounted in an upward direction, IP51 if the shaft is installed in a horizontal direction, and IP53 if the shaft is installed in a downward direction). If there is a shaft seal (optional) then the IP66 standard is mandatory (so concerned equipment becomes dust and drip-free). Furthermore, the manufacturer binds its users to use those cable connectors which are environmentally sealed.

As far as the operating temperature is concerned, these servo motors are recommended to be used in the locality where the temperature ranges between 0 and 40 degrees centigrade. Anyhow, storage temperature can range between -30 and 70 degrees centigrade. If the temperature doesn’t remain within prescribed limits, then the owner must make arrangements for enough clearance, airflow, and heatsink.

While storing it must be ensured that the atmosphere is noncorrosive. Relative humidity at the storage site could be anywhere between 5 and 95% noncondensing.

Thermal Management

MPL series servo motors are designed to be smaller in size which complicates the heat management system. But advanced winding techniques, winding insulation, and winding material make this motor thermally efficient. Moreover, the presence of magnets instead of another winding also makes these motors more efficient thermally. During the designing process, heat transfer is also paid heed to. Anyhow, the manufacturer suggests not enclosing the motor except in situations when a forced-air mechanism is used to cool down the motor. It is also suggested that no such devices are placed near motors that produce heat. Aluminum heatsinks can also be used to dissipate heat more efficiently.

Certifications

MP Low inertia servo motors are components that are UL Recognized to corresponding CSA and UL standards. These servo motors are also CE marked for all applicable directives.

Other Products of the MP Series

Low inertia motors are regarded as one product of the MP series, as there are two more products of the MP series as well. These are MP series food-grade motors and stainless-steel motors. These two types of products are designed to meet some extra application requirements.

MP series food grade motors mainly possess characteristics of MP Low inertia motors but they also meet additional requirements of food and beverage related applications e.g. packaging. These motors are designed to have better sealing and food-grade coatings so they could be used near food items. Similarly, MP series stainless steel motors are designed to work in hygienic environments. These motors can be used safely in dairy and poultry-related applications where there could be a corrosive atmosphere or high pressure. These motors are ensured to be leakproof and they are factory sealed to achieve this purpose.

Browse our selection of MPL Servo Motors units

AutomationStop.com's online catalog offers one of the largest selections of preowned MPL Servo Motors units in the world.

MPL-A310P-MK22AA

Catalog number MPL-A310P-MK22AA is an Allen-Bradley low-inertia rotary servo motor. This motor has a 5000-revolution per minute speed rating and a 200 VAC voltage rating. This motor includes a multi-turn high-resolution encoder. The MPL-A310P-MK22AA has a 100-millimeter frame and a one-inch magnetic stack. This servo motor utilizes a flange mount as its mounting option.

MPL-A310P-MK24AA

The MPL-A310P-MK24AA low-inertia servo motor was designed and produced by Allen Bradley. This unit has a 230-volt AC voltage rating. Its frame measures 100 millimeters, and its magnetic stack measures 1.0 inch. The MPL-A310P-MK24AA operates at five thousand (5000) rev/min. For feedback, this product is equipped with a multi-turn encoder with high resolution. It can be mounted via a flange mount.

MPL-A310P-MK72AA

Catalog number MPL-A310P-MK72AA is an MP-series servo motor that was produced by Allen Bradley. This motor has a 200-volt AC-rated voltage, along with low inertia. The frame of this product measures 100 millimeters, and the magnetic stack measures 1.0 inch. This servo motor is capable of operating at a 5000 rev/min rated speed. For feedback purposes, the MPL-A310P-MK72AA servo motor is equipped with a multi-turn encoder. This product features circular DIN connectors and a mounting flange.

MPL-A310P-MK74AA

Part number MPL-A310P-MK74AA is a 200-volt servo motor with low inertia. The frame size for this device is 100 millimeters, and the magnetic stack length is 1.0 inch. This product can operate at speeds rated up to 5000 rev/min. The MPL-A310P-MK74AA servo motor features a high-resolution encoder that provides feedback in multiple rotations. This servo motor has circular DIN connectors, as well as a mounting flange.

MPL-A310P-SJ22AA

Product number MPL-A310P-SJ22AA is a low-inertia servo motor belonging to the MP series of motors. This device was produced by Allen Bradley. The MPL-A310P-SJ22AA is classified as a 200-volt servo motor. Its speed is rated as 5000 rpm. This unit has a single-turn encoder. It also has a shaft key, but no shaft seal. The connector of this servo motor is a circular bayonet connector. The MPL-A310P-SJ22AA also has an IEC metric mounting flange. The frame of this low-inertia servo motor measures 100 millimeters.

MPL-A310P-SJ24AA

Manufactured by Allen Bradley / Rockwell Automation, product number MPL-A310P-SJ24AA is a low-inertia servo motor with a 200 VAC voltage rating. This unit has a 100-millimeter-sized frame, along with a 1.0-inch-long magnetic stack. This servo motor is capable of operating at speeds rated up to 5000 r/min. This unit is equipped with a high-resolution encoder that provides feedback in a single turn. The MPL-A310P-SJ24AA has circular bayonet connectors, and it can be flange mounted.

MPL-A310P-SJ72AA

The Allen Bradley MPL-A310P-SJ72AA is a low-inertia servo motor belonging to the MP line of products. This unit has a 200 VAC voltage rating, as well as a 5000 rev/min speed rating. The frame size of this device is 100 millimeters, and the magnetic stack length is one inch. For feedback purposes, this motor features a single-turn encoder and circular DIN connectors. This servo motor does not have a brake.

MPL-A310P-SJ74AA

Product number MPL-A310P-SJ74AA is a 200-volt AC servo motor that was manufactured by Allen Bradley. This servo motor has low inertia and can operate at speeds rated at 5000 rev/min. This product has a 100 mm frame, in addition to a 1.0 in. magnetic stack. For feedback purposes, the MPL-A310P-SJ74AA features a single-turn encoder. This unit has circular DIN connectors and a 24-volt DC brake.

MPL-A310P-SK22AA

Catalog number MPL-A310P-SK22AA is a servo motor from Allen Bradley. This motor has low inertia, a 200-volt AC voltage rating, and a 100 mm frame. In addition, the magnetic stack of this motor has a length of 1.0 inch. Furthermore, the speed that this servo motor operates at is rated as 5000 revolutions per minute. The MPL-A310P-SK22AA is equipped with a single-turn encoder for feedback purposes. This unit also has a circular bayonet connector.

MPL-A310P-SK24AA

Catalog number MPL-A310P-SK24AA is a low-inertia servo motor from Allen Bradley's MP series of products. This motor has a 200-volt rating and can operate at 5000 revolutions per minute. This device has a 100-millimeter frame, along with a 1.0-inch-long magnetic stack. The MPL-A310P-SK24AA features a high-resolution encoder that provides feedback in a single rotation. This product also features circular bayonet connectors and a 24 VDC brake.

MPL-A310P-SK72AA

Part number MPL-A310P-SK72AA is a servo motor from Allen Bradley's MP product series. It has a 200-volt rating and low inertia. This motor's frame measures 100 millimeters, and its magnetic stack measures 1.0 inch. This servo motor can operate at speeds rated up to 5000 r/min. The MPL-A310P-SK72AA is equipped with a single-turn encoder for feedback purposes. This device has circular DIN connectors and a mounting flange.

MPL-A310P-SK74AA

Catalog number MPL-A310P-SK74AA is a 200-volt AC, low-inertia servo motor. This product was designed by Allen Bradley / Rockwell Automation. This servo motor has a 100-millimeter frame and a 1.0-inch-long magnetic stack. The MPL-A320H-HK24AA can operate at speeds rated at 5000 rev/min. For feedback purposes, this product is equipped with a single-turn encoder. This unit has circular DIN connectors and a 24-volts DC brake.

MPL-A320H-HJ22AA

Produced by Allen-Bradley, part number MPL-A320H-HJ22AA is a low-inertia servo motor. It belongs to the MP series of Allen Bradley servo motors. The MPL-A320H-HJ22AA operates at a speed of 3500 r/min. Its frame measures 100 mm, and its magnetic stack measures 2.0 in. long. For feedback purposes, a 2000-line encoder is included in the MPL-A320H-HJ22AA. This servo motor is capable of being mounted via the use of a flange mount.

MPL-A320H-HJ24AA

Catalog number MPL-A320H-HJ24AA, which is an Allen Bradley product, is an MP-series low-inertia servo motor. This unit has a 200V rating, and it operates at speeds of up to 3500 r/min. Its frame size is 100 millimeters. Additionally, the MPL-A320H-HJ24AA's magnetic stack length is two inches. This servo motor includes a 2000-line encoder, circular bayonet connectors, and a 24 VDC brake. The MPL-A320H-HJ24AA can be mounted using a flange mount.

MPL-A320H-HJ72AA

Part number MPL-A320H-HJ72AA is a 200-volt AC servo motor with low inertia. This device was designed by Allen Bradley, and it belongs to the MP series of products. This servo motor has a 100-millimeter frame and a 2.0-inch magnetic stack. This product is capable of operating at speeds rated up to 3500 rpm. The MPL-A320H-HJ72AA features a 2000-line encoder for feedback purposes. This device also features circular DIN connectors and a mounting flange.

MPL-A320H-HK22AA

The MPL-A320H-HK22AA is an MP-series low-inertia servo motor manufactured by Allen-Bradley. It has a 1-kilowatt power rating and a speed rating of 3500 revolutions per minute. It also has a 230-volt AC input voltage rating. The MPL-A320H-HK22AA has a 2000-line encoder for feedback.

MPL-A320H-HK72AA

The MPL-A320H-HK72AA, which was designed by Allen Bradley, is a 200-volt, low-inertia servo motor. This product belongs to the MP series of Allen Bradley products. It has a 100 mm frame, along with a 2.0 in. magnetic stack. This servo motor can operate at a speed rated at 3500 revolutions per minute. The MPL-A320H-HK72AA features a 2000-line encoder for feedback purposes. It has circular DIN connectors and a mounting flange.

MPL-A320H-MJ22AA

Part number MPL-A320H-MJ22AA is a low-inertia servo motor with a 200-volt rating. This product was designed by Allen Bradley / Rockwell Automation. The frame of this servo motor measures 100 millimeters. In addition, its magnetic stack measures 2.0 inches. The MPL-A320H-MJ22AA can operate at speeds rated up to 3500 rev/min. This servo motor features a multi-turn encoder for feedback and a flange for mounting.

MPL-A320H-MJ72AA

Designed and produced by Allen Bradley, product number MPL-A320H-MJ72AA is a 200-volt servo motor with low inertia. This device has a 100-millimeter frame along with a 2.0-inch magnet stack. The speed of this motor is rated at 3500 rev/min. For feedback purposes, the MPL-A320H-MJ72AA includes a multi-turn encoder. This unit has circular DIN connectors and a flange for mounting.

MPL-A320H-MJ74AA

Product number MPL-A320H-MJ74AA is an Allen Bradley MP-series servo motor with low inertia and a 200 VAC voltage rating. This device has a 100 mm frame and a 2.0 in. magnetic stack. The speed that this motor operates is rated as 3500 rev/min. For feedback purposes, the MPL-A320H-MJ74AA servo motor features a multi-turn encoder. This product has circular DIN connectors and a 24 VDC brake.

MPL-A320H-MK22AA

The MPL-A320H-MK22AA is an MP-series low-inertia servo motor that was manufactured by Allen Bradley. This unit has a 200 VAC rated voltage, as well as a 3500 rpm rated speed. It has a 100 mm frame and a 2.0 in. magnet stack. The MPL-A320H-MK22AA includes a high-resolution encoder that provides feedback in multiple rotations. This servo motor has circular bayonet connectors and a mounting flange.

MPL-A320H-MK72AA

Catalog number MPL-A320H-MK72AA is a low-inertia servo motor from Allen Bradley's MP series of products. This device has a 200-volt rating, in addition to a speed rating of 3500 rpm. The MPL-A320H-MK72AA has a 100-millimeter frame and a 2.0-inch-long magnet stack. This device features an encoder that is used to provide feedback in multiple turns. The MPL-A320H-MK72AA has circular DIN connectors and a mounting flange.

MPL-A320H-SJ22AA

Manufactured by Allen Bradley/Rockwell Automation, catalog number MPL-A320H-SJ22AA is a servo motor with low inertia and a 200 VAC voltage rating. This unit is a part of the MP series of servo motors. The MPL-A320H-SJ22AA has a frame size of one hundred (100) millimeters. The speed at which this motor operates is rated at 3500 revolutions per minute. This device can be mounted through the use of a flange mount.

MPL-A320H-SJ72AA

Manufactured by Allen Bradley, part number MPL-A320H-SJ72AA is a 200 VAC low-inertia servo motor. This device has a frame measuring 100 millimeters, as well as a magnet stack measuring 2.0 inches. This servo motor can operate at speeds rated at 3500 rev/min. The MPL-A320H-SJ72AA is equipped with a high-resolution encoder that provides feedback in a single rotation. The MPL-A320H-SJ72AA also has circular DIN connectors and a mounting flange.

MPL-A320H-SK22AA

Product number MPL-A320H-SK22AA is a low-inertia servo motor from Allen Bradley. This unit has a 200-volt rating and can operate at 3500 revolutions per minute (rpm). This servo motor has a frame that measures 100 millimeters, in addition to a magnetic stack that measures 2.0 inches. The MPL-A320H-SK22AA includes a single-turn encoder for feedback purposes. It has circular bayonet connectors and a mounting flange.

MPL-A320H-SK72AA

Catalog number MPL-A320H-SK72AA is a low-inertia servo motor produced by Allen Bradley. This device has a 200-volt voltage rating and a 3500 r/min speed rating. This servo motor features a 100-millimeter frame and a 2.0-inch magnet stack. The MPL-A320H-SK72AA includes a single-turn encoder for feedback purposes, in addition to circular DIN connectors and a mounting flange for mounting purposes.

MPL-A320P-HH22AA

The MPL-A320P-HH22AA low-inertia servo motor was designed and produced by Allen Bradley. It has a 200-volt rating and can operate at 5000 rev/min. This unit has a 100 mm frame, as well as a 50.8 mm stack length. The rated output of this servo motor is 1.3 kilowatts. The MPL-A320P-HH22AA features a 2000-line encoder for feedback purposes. This motor can be mounted via a flange mount.

MPL-A320P-HH72AA

Catalog number MPL-A320P-HH72AA is a low-inertia servo motor with a 200-volt AC rating. This device was designed by Allen Bradley. The frame of this servo motor measures 100 millimeters, and its magnet stack measures 2.0 inches. The MPL-A320P-HH72AA can operate at a 5000 rpm rated speed. This device features a 2000-line encoder for feedback purposes. This motor has circular DIN connectors and a mounting flange.

MPL-A320P-HJ22AA

Produced by Allen Bradley / Rockwell Automation, part number MPL-A320P-HJ22AA is an MP-series servo motor. This motor belongs to the 200-volt class of servo motors, and it has low inertia. The speed that this servo motor operates at is rated as 5000 revolutions per minute. The frame of the MPL-A320P-HJ22AA measures 100 millimeters, and its magnetic stack has a length that measures 2.0 inches.

MPL-A320P-HJ24AA

Part number MPL-A320P-HJ24AA is a 200-volt AC servo motor with low inertia. This unit was produced by Allen Bradley, and it is part of the MP series of products. The frame of this motor measures 100 millimeters. Additionally, the magnetic stack measures 2.0 inches. The MPL-A320P-HJ24AA can operate at 5000 revolutions per minute. This servo motor is equipped with a 2000-line encoder for feedback purposes. The MPL-A320P-HJ24AA also has a 24-volt DC brake and a flange for mounting purposes.

MPL-A320P-HJ72AA

Produced by Allen Bradley, part number MPL-A320P-HJ72AA is a low-inertia servo motor with a voltage rating of 230 volts AC. It has a 100-millimeter frame, along with a 2.0-inch magnetic stack length. The speed at which the MPL-A320P-HJ72AA operates is rated as 5000 rev/min. This product features a 2000-line encoder, a shaft key, and a circular DIN connector. The MPL-A320P-HJ72AA may be mounted via the use of a flange mount.

MPL-A320P-HK22AA

The MPL-A320P-HK22AA servo motor from Allen Bradley has a 200-volt rating and low inertia. This unit has a 100 mm frame and a 2.0 in. magnetic stack. This servo motor is capable of operating at 5000 rev/min. The MPL-A320P-HK22AA features a 2000-line encoder for feedback purposes. This motor also features circular bayonet connectors and a mounting flange.

MPL-A320P-HK24AA

Product number MPL-A320P-HK24AA is an MP-series servo motor with a 200-volt rating and low inertia. This device features a 100-millimeter frame and a 2.0-inch-long magnet stack. This servo motor operates at a speed rated at 5000 r/min. The MPL-A320P-HK24AA servo motor includes a 2000-line encoder for feedback purposes. This product has a 24-volt DC brake and a mounting flange. The MPL-A320P-HK24AA can be used in applications that require speed control or motion control.

MPL-A320P-HK72AA

Catalog number MPL-A320P-HK72AA is a low-inertia servo motor from Allen Bradley's MP series of products. It has a 200 VAC rating. This motor can operate at speeds rated up to 5000 r/min. The MPL-A320P-HK72AA has a 100-millimeter frame, as well as a 2.0-inch-long magnetic stack. A 2000-line encoder is utilized by this servo motor to receive feedback. The MPL-A320P-HK72AA has circular DIN connectors and a mounting flange.

MPL-A320P-H-X165

The MPL-A320P-H-X165 is a low-inertia servo motor that was designed and produced by Allen-Bradley / Rockwell Automation. This motor has a voltage rating of 200 volts alternating current (AC). The MPL-A320P-H-X165 has a 100 mm frame and a 2.0 in. magnet stack. This servo motor has a 5000 rpm rated speed. Additionally, the MPL-A320P-H-X165 has a 1.3-kilowatt rated output. This product features a 2000-line encoder and circular bayonet connectors.

MPL-A320P-MJ22AA

Manufactured by Allen Bradley, product number MPL-A320P-MJ22AA is a low-inertia servo motor belonging to the MP servo motor product series. This motor features a multi-turn encoder, a circular bayonet connector that faces the shaft, an IEC metric mounting flange, and a shaft key. The operational speed of the MPL-A320P-MJ22AA is rated as 5000 r/min. Additionally, the frame of the MPL-A320P-MJ22AA measures 100 mm.

MPL-A320P-MJ24AA

The MPL-A320P-MJ24AA servo motor from Allen Bradley has a voltage rating of 200 volts, in addition to low inertia. This product belongs to Allen Bradley's MP series of servo motors. The MPL-A320P-MJ24AA has a 100-millimeter frame and a 2.0-inch-long magnetic stack. The speed at which this motor operates is rated at 5000 rev/min. This unit includes a multi-turn encoder for feedback purposes. The MPL-A320P-MJ24AA has a mounting flange, circular bayonet connectors, and a 24-volt DC brake.

MPL-A320P-MJ72AA

Product number MPL-A320P-MJ72AA is an MP-series low-inertia servo motor. This product was made by Allen Bradley/Rockwell Automation. This motor has a voltage rating of 200 volts and a speed rating of 5000 rpm. It has a 100 mm frame and a 2.0 in. long magnetic stack. The MPL-A320P-MJ72AA has a single-turn high-resolution encoder for feedback purposes.

MPL-A320P-MJ74AA

Manufactured by Allen Bradley / Rockwell Automation, part number MPL-A320P-MJ74AA is a low-inertia servo motor from the MP series. This servo motor is rated at 200 volts. Its frame measures 100 millimeters, and its magnetic stack measures 2.0 inches long. The speed at which the MPL-A320P-MJ74AA operates is rated as 5000 rev/min. This product is equipped with a multi-turn encoder, as well as a 24-volt DC brake.

MPL-A320P-MK22AA

Part number MPL-A320P-MK22AA is a low-inertia servo motor with a 200 VAC rated voltage. This unit has a 100-millimeter frame and a 2.0-inch magnetic stack. The base speed rating of the MPL-A320P-MK22AA is 5000 rev/min. This servo motor includes a multi-turn encoder for feedback purposes and circular bayonet connectors. The MPL-A320P-MK22AA was designed to be used in motion or speed control applications.

MPL-A320P-MK24AA

Produced by Allen Bradley, part number MPL-A320P-MK24AA is a servo motor with low inertia and a 200 VAC rated voltage. The frame of this device measures 100 millimeters, and the magnetic stack measures 2.0 inches. The MPL-A320P-MK24AA servo motor operates at speeds rated at 5000 rev/min. This device features a multi-turn encoder and a 24-volt DC brake. The MPL-A320P-MK24AA can be mounted via the use of a flange mount.

MPL-A320P-MK72AA

The Allen Bradley MPL-A320P-MK72AA is a low-inertia servo motor from the MP series of products. The voltage rating of this device is 200 volts. The frame of the MPL-A320P-MK72AA measures 100 millimeters. Additionally, its magnetic stack measures 2.0 inches. This servo motor can operate at speeds rated up to 5000 r/min. The MPL-A320P-MK72AA includes a multi-turn encoder for feedback purposes.

MPL-A320P-MK74AA

The MPL-A320P-MK74AA from Allen Bradley is a 200-volt AC servo motor with low inertia. This motor features a 100-millimeter frame and a 2.0-inch magnetic stack. The MPL-A320P-MK74AA servo motor has a base speed rating of 5000 rev/min. This motor includes a multi-turn encoder for feedback, in addition to a flange for mounting. The MPL-A320P-MK74AA servo motor has circular DIN connectors and a 24-volt DC brake.

MPL-A320P-SJ22AA

Product number MPL-A320P-SJ22AA is a 200-volt, low-inertia servo motor manufactured by Allen Bradley. This device has a 100 mm frame and a 2.0 in. magnetic stack. The base speed of this Allen Bradley servo motor is 5000 r/min. The MPL-A320P-SJ22AA features a single-turn encoder and circular bayonet connectors. This servo motor can be mounted via the use of a mounting flange.

MPL-A320P-SJ24AA

Catalog number MPL-A320P-SJ24AA is a servo motor from Allen-Bradley / Rockwell Automation. This motor has a rated voltage of 200 volts, as well as low inertia. The motor's frame measures 100 millimeters, and its magnetic stack measures 2.0 inches. The base speed of the MPL-A320P-SJ24AA servo motor is rated at 5000 rpm. This unit has a single-turn encoder and a 24-volt brake. The MPL-A320P-SJ24AA also has circular bayonet connectors.

MPL-A320P-SJ72AA

Catalog number MPL-A320P-SJ72AA is a low-inertia rotary servo motor with premium permanent magnets. It was produced by Allen Bradley as part of the MP series of servo motors. This unit has a 200 VAC voltage rating. It has a 100-millimeters-sized frame, as well as a 2.0-inch-long magnetic stack. The MPL-A320P-SJ72AA operates at speeds rated at 5000 rev/min. This servo motor can be mounted using a flange mount.

MPL-A320P-SJ74AA

The MPL-A320P-SJ74AA, which was produced by Allen-Bradley, is a low-inertia servo motor. This motor has a 200 VAC voltage rating and a 5000 rpm base speed rating. This unit's frame measures 100 millimeters. Additionally, the length of the magnetic stack measures 2.0 inches. The MPL-A320P-SJ74AA servo motor features a single-turn encoder and a mounting flange. This product has circular DIN connectors and a 24-volt direct current (DC) brake.

MPL-A320P-SK22AA

The MPL-A320P-SK22AA servo motor from Allen Bradley / Rockwell Automation has low inertia and a 200-volt AC voltage rating. This product has a 100-millimeter frame, as well as a 2.0-inch-long magnetic stack. This servo motor's base speed rating is 5000 rev/min. For feedback purposes, the MPL-A320P-SK22AA includes a single-turn encoder. It has circular bayonet connectors.

MPL-A320P-SK24AA

The MPL-A320P-SK24AA servo motor is a product of Allen Bradley / Rockwell Automation. This device has low inertia. It also has a 200-volt AC voltage rating and a 5000 rpm speed rating. The frame of the MPL-A320P-SK24AA measures 100 mm, and the magnet stack measures 2.0 in. This servo motor features a single-turn encoder for feedback purposes. This device includes a 24-volt DC brake.

MPL-A320P-SK72AA

Product number MPL-A320P-SK72AA is an Allen Bradley servo motor with low inertia and a 200-volt AC voltage rating. This unit has a frame that measures 100 millimeters. In addition, the magnetic stack of this servo motor has a length that measures 2.0 inches. The base speed of this servo motor is rated at 5000 rev/min. The MPL-A320P-SK72AA includes a single-turn encoder for feedback purposes.
Previous 1 2 3

...

12 Next

Displaying 50 of 573 results.

Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.

Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

TOP