GE / IP FANUC Series 90/30 In Stock

Email

sales@automationstop.com

Call Now

(919) 867-5794

Mon-Fri 8AM-5PM EST

Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.

Allen Bradley - Motors

MPL Servo Motors

The MPL series consists of low-inertia rotary servo motors with premium permanent magnets that are manufactured by Allen-Bradley. These servo motors are designed to fulfill the stringent requirements of various motion systems. The MP-series motors come with a mounting pilot to help operators mount the motor in a system. These motor units have a high torque-to-size ratio, innovative winding technology, good torque performance, rapid acceleration, and the ability to operate with a sustained shaft load. They are appropriate for use in a variety of industries and applications, including handling of materials, automotive, and conversion-type applications. Winding insulating materials are used in each MPL servo motor to improve thermal management. The installation adheres to all local rules and installation standards that improve safety and electromagnetic compatibility, and its IP66 protection ensures protection from strong jet water sprays and dust particles. The working temperature ranges from 0 to 40 degrees Celsius. MPL servo motors are offered in nine frame sizes that range from 63 and 75-millimeter frames to larger frames measuring 100 to 300 millimeters. High-energy rare-earth magnets are used in the MPL servo motors. This series of motors have power ratings ranging from 0.16 to 18.6 kilowatts, with some producing a speed of up to 8000 revolutions per minute (rev/min). Two-pole resolvers, 2000-line encoders, multi-turn encoding systems, and single-turn encoders using the Hiperface encoder protocol are among the available feedback options. Single-turn or multi-turn high-resolution encoders are standard on MP-series low-inertia motors. MPL motors are designed for use with Allen-Bradley controllers. The MP series has motors rated at 200 and 400 volts.

MPL Servo Motors

MPL (Low Inertia) servo motors from Allen Bradley are highly efficient and compact motors that are used for applications that demand motion sensitivity owing to significantly low rotor inertia. These motors have a high torque density (torque with respect to either weight or volume). These motors are brushless and are available in 9 different frame sizes. Premium permanent magnet is used in the construction of these motors. These servo motors are used with a range of Allen Bradley drive series (discussed later). MPL servo motors are ideally used for applications like assembling electronic components, packaging, material handling in different industries, automotive, and metal forming industries.

Mechanical and Electrical Specifications

Rotor and Rotor Magnets

MP Low Inertia servo motors are brushless AC motors. These motors are synchronous motors (recall the fact that magnet is present, no need for induction). For rotor flux production, their rotors are equipped with rare earth magnets which are premium in quality, and high in energy. These magnets pave way for quicker acceleration. Magnets on the rotors of MPL servo motors might have 8 different stack lengths (1 inch to 8 inch and corresponding codes as multiples of 10).

Rotors of these motors have threaded holes at their shaft end.

Stator Winding

Stator winding, which hugely decides the weight of the machine, is the major factor in determining torque and power density. To keep torque and power density high in MPL servo drives, stator winding is also made using innovative technology, and quality material is used for insulating this winding. Powerful rotor magnets and advanced stator windings make this motor provide 40% more torque (w.r.t. size) than conventional motors. This stator winding is also helpful in better heat management.

Motor Connectors and Cables

MPL servo motors can either have a connector that is a circular bayonet, and it faces a shaft (code 2) or these motors could come with a DIN connector that can rotate up to 180 degrees for ease of use. This connector is SpeedTec circular connector (code 7).

MPL servo motors also have brake (or power) connectors and feedback connectors as motion-sensitive applications need them. The supplier of this product will not provide auxiliary feedback, motor feedback, and I/O connector kits as accessories to the buyer.

Cables provided by the factory manufacturer will have standard length. These cables have appropriate sealing to ensure that the motor achieves promised environmental ratings as well as shield termination. These cables meet specifications and requirements of the following standards: NFPA 79 (National Fire Protection Association code 79) compliant, DESINA cable jacket coloring, tray cable rating, 600V insulation rating, RoHS and REACH, UL-Listed. Customers can also go with the option of designing their cables. For this purpose, kits are made available by Rockwell Automation. The construction of the cable would also affect the Electromagnetic Compatibility (EMC) of the system so extreme care is needed while constructing the cable. Shield of either type of cable would need grounding; it could be hazardous otherwise.

Allen Bradley directs its user that connector housings in the case of M40 and M23 can be rotated to make connector placement in a rearward direction. While connector housings for M58 must be removed physically and placed back in 90 degrees increments.

Shaft Seal

Not all servo motors of the MP Low inertia series come with a shaft seal. The user has to decide if, for some applications and the environment, a shaft seal is needed or not. The shaft seal will ensure that dust particles and moisture content does not enter motor bearings. Moreover, the type of use will also determine the frequency or duration of maintenance and replacement of shaft seals because these wear with time. Allen Bradley recommends users of these motors to inspect and maintain this component regularly – typically every 3 months but not to go beyond 12 months.

For these servo motors, nitrile is used to build shaft seals. For smooth operation of the shaft seal, a lubricant is included in the accessories package. To lubricate the shaft seal, the use of a shaft seal kit is recommended provided by Rockwell Automation. For different servo motors in the MPL series, different shaft seal kits are available, e.g., for motor catalog numbers MPL-A15xx and MPL-B15xx, the shaft seal kit with catalog number MPL-SSN-F63F75 is recommended, while for motor catalog numbers MPL-A3xx and MPL-B3xx, the shaft seal kit with the catalog number MPL-SSN-A3B3 is suggested, and so on. Furthermore, Rockwell Automation recommends its users use its shaft seals. If the owner uses shaft seals from any other company, then any sort of warranty (implied or direct) is not entertained by Rockwell Automation.

The presence or absence of a shaft seal will also determine which standards the product will comply with (discussed later in detail).

Mounting Dimensions

For MPL servo motors, the IEC72-1 standard for rotating electrical machines is complied with while making mounting dimensions. Indirectly, it covers frame numbers all from 56 to 400 and flange numbers ranging between 55 and 1080. Their mounting flanges have free mounting holes of type FF.

Frame Sizes

Allen Bradley has used novel design techniques (e.g. while designing stator winding, choosing winding insulation, placement of magnets, choice of magnets, etc.) to keep the size of MPL servo motors as low as possible. As mentioned, motors from this series of Allen Bradley products are available in nine different frame sizes – all being compact and sturdy. These frame sizes and the corresponding codes are as follows:

  • Code 15 indicates a frame size of 63 mm
  • Code 2 indicates a frame size of 75 mm
  • Code 3 indicates a frame size of 100 mm
  • Code 4 indicates a frame size of 115 mm
  • Code 45 indicates a frame size of 130 mm
  • Code 5 indicates a frames size of 165 mm
  • Code 6 indicates a frame size of 215 mm
  • Code 8 indicates a frame size of 265 mm
  • Code 9 indicates a frame size of 300 mm

Encoders and Feedback

Servo motors from the MPL series are used for those motion applications which require high performance. High-resolution encoders are also there to determine the accurate position of the rotor. Thus, these motors have efficient high-resolution feedback systems. This feedback could be either single turn (-E and –S) or multi-turn (-V and -M) through the encoder. In single turn feedback systems, the absolute position of the rotor is fed back to the controller in just one turn while maintaining high resolution. On the other hand, 4096 turns are needed to provide high-resolution feedback in multi-turn encoder systems. This feedback would also be the absolute position of the motor rotor.

 Motors with the –M and –S code can make up to two million counts in one revolution while motors with code –E and –V give up to two hundred and sixty counts in one revolution – all giving smooth performance.

Motors in the MPL series also have the option of an incremental encoder (with Code ‘H’) and resolver (with code ‘R’).

Brake Availability

MPL servo motors could either have a 24V DC brake (code 4) or no brake at all (code 2). If the brake is present, it will keep the motor shaft still or hold it at 0rpm (revolutions per minute) unless applied torque remains below the rated holding torque for the brake. Anyhow, this brake is not to bring the motor to a stop.

For disengaging this brake, a separate power source is needed. This power can be provided by a servo motor controller or an operator control which could be manual.

On-board Memory for Commissioning

To know motor parameters, the system doesn’t need to perform commissioning of these MPL servo motors from scratch. Instead, these motors are equipped with a memory unit to store the identity of the motor. So, upon startup, the system could identify motor, and commissioning time could be reduced significantly.

Voltage Class

Motors from the MPL series are grouped into two classes based on operating voltage: 200V class and 400V class. In the catalog number MPL-xxxxxx-xx7xAA, the first 'x' is to distinguish between voltage classes. Because of two options for voltage, A is for 200V class of motors and B is that for 400V class motors.

Compatibility for Drives

The motor, being the crucial part of a drive system, needs to be designed while considering application requirements and characteristics of other components in the drive system. In other words, the motor’s compatibility with the drive should be kept in mind. MP Low inertia servo motors are compatible with the following Allen Bradley drive systems: Kinetix 5500, Kinetix 6200, Kinetix 6500, Kinetix 6000, Kinetix 300, Kinetix 350, Kinetix 2000, Kinetix 7000, and Ultra3000.

Torque Output

Servo motors from the MPL series give its users a wide range of options for torque. Different motors from this series are capable of providing continuous stall torque in the range of 0.26 to 163Nm while peak stall torque goes up to 278Nm (e.g. catalog number MPL-B980B) starting from 0.77Nm (e.g. catalog number MPL-A1510V). Servo motors in MP Low inertia series give 40% higher torque output than that of other servo motors of the same size.

Speed Output

Servo motors of the MP Low Inertia series can attain speed up to 8000 rpm (revolutions per Minute). Other available options for rated speeds and respective codes are given below.

  • Code B indicates a rated speed of 1000 rpm
  • Code C indicates a rated speed of 1500 rpm
  • Code D indicates a rated speed of 2000 rpm
  • Code F indicates a rated speed of 3000 rpm
  • Code H indicates a rated speed of 3500 rpm
  • Code J indicates a rated speed of 3750 rpm
  • Code K indicates a rated speed of 4000 rpm
  • Code P indicates a rated speed of 5000 rpm
  • Code Y indicates a rated speed of 6000 rpm
  • Code U indicates a rated speed of 7000 rpm
  • Code V indicates a rated speed of 8000 rpm

Power Output

Like torque, motors in MP Low inertia series have higher power density as well. Rated output (in kW) at respective rated speed can go up to 18.6kW (e.g., motor catalog number MPL-B980D) starting from a small figure of 0.16kW (e.g., motor catalog number MPL-A1510V).

Environmental Specifications

Rockwell Automation has made low inertia servo motors of the MPL series compatible with IP50 or IP66 depending upon the absence or presence of a shaft seal. If there is no shaft seal then the motor follows the IP50 standard minimum (typically IP50 if the shaft is mounted in an upward direction, IP51 if the shaft is installed in a horizontal direction, and IP53 if the shaft is installed in a downward direction). If there is a shaft seal (optional) then the IP66 standard is mandatory (so concerned equipment becomes dust and drip-free). Furthermore, the manufacturer binds its users to use those cable connectors which are environmentally sealed.

As far as the operating temperature is concerned, these servo motors are recommended to be used in the locality where the temperature ranges between 0 and 40 degrees centigrade. Anyhow, storage temperature can range between -30 and 70 degrees centigrade. If the temperature doesn’t remain within prescribed limits, then the owner must make arrangements for enough clearance, airflow, and heatsink.

While storing it must be ensured that the atmosphere is noncorrosive. Relative humidity at the storage site could be anywhere between 5 and 95% noncondensing.

Thermal Management

MPL series servo motors are designed to be smaller in size which complicates the heat management system. But advanced winding techniques, winding insulation, and winding material make this motor thermally efficient. Moreover, the presence of magnets instead of another winding also makes these motors more efficient thermally. During the designing process, heat transfer is also paid heed to. Anyhow, the manufacturer suggests not enclosing the motor except in situations when a forced-air mechanism is used to cool down the motor. It is also suggested that no such devices are placed near motors that produce heat. Aluminum heatsinks can also be used to dissipate heat more efficiently.

Certifications

MP Low inertia servo motors are components that are UL Recognized to corresponding CSA and UL standards. These servo motors are also CE marked for all applicable directives.

Other Products of the MP Series

Low inertia motors are regarded as one product of the MP series, as there are two more products of the MP series as well. These are MP series food-grade motors and stainless-steel motors. These two types of products are designed to meet some extra application requirements.

MP series food grade motors mainly possess characteristics of MP Low inertia motors but they also meet additional requirements of food and beverage related applications e.g. packaging. These motors are designed to have better sealing and food-grade coatings so they could be used near food items. Similarly, MP series stainless steel motors are designed to work in hygienic environments. These motors can be used safely in dairy and poultry-related applications where there could be a corrosive atmosphere or high pressure. These motors are ensured to be leakproof and they are factory sealed to achieve this purpose.

Browse our selection of MPL Servo Motors units

AutomationStop.com's online catalog offers one of the largest selections of preowned MPL Servo Motors units in the world.

MPL-A320P-SK74AA

The MPL-A320P-SK74AA servo motor from Allen-Bradley has low inertia and a 200 VAC voltage rating. This device has a 100 mm frame and a 2.0 in. magnet stack. The base speed rating of the MPL-A320P-SK74AA is 5000 revolutions per minute. This product features a single-turn encoder for feedback purposes, as well as a flange for mounting purposes. The MPL-A320P-SK74AA has a 24 VDC brake and circular DIN connectors.

MPL-A330P-HJ22AA

Designed and manufactured by Allen Bradley, catalog number MPL-A330P-HJ22AA is a 200-volt servo motor. This motor has low inertia and a speed rating of 5000 rev/min. The frame of this product measures 100 millimeters. In addition, its magnet stack measures 3.0 inches. For feedback purposes, the MPL-A330P-HJ22AA includes a 2000-line encoder. This servo motor has circular bayonet connectors and a flange for mounting.

MPL-A330P-HJ72AA

Catalog number MPL-A330P-HJ72AA is a servo motor from Allen Bradley. This device has a 200V rating and low inertia. The frame of this product measures 100 mm, and its magnetic stack has a length that measures 3.0 inches. The speed of the MPL-A330P-HJ72AA is rated as 5000 revolutions per minute. This servo motor is equipped with a 2000-line encoder. This unit also has a shaft key, but no shaft seal. The MPL-A330P-HJ72AA has an IEC metric flange for mounting purposes.

MPL-A330P-HK22AA

Part number MPL-A330P-HK22AA is a low-inertia servo motor produced by Allen Bradley. This motor has a voltage rating of 200 volts, as well as a base speed rating of 5000 rev/min. The MPL-A330P-HK22AA has a 100 mm frame and a 3.0 in. magnetic stack. This servo motor features a 2000-line encoder for feedback purposes. It also features a flange for mounting purposes. The MPL-A330P-HK22AA has circular bayonet connectors.

MPL-A330P-HK72AA

Part number MPL-A330P-HK72AA is a servo motor from Allen Bradley/Rockwell Automation. This motor has low inertia and a 200-volt AC voltage rating. The MPL-A330P-HK72AA has a 100-millimeter frame, in addition to a 3.0-inch magnetic stack. This motor operates at a rated speed of 5000 r/min. For feedback purposes, the MPL-A330P-HK72AA includes a 2000-line encoder. It even has a circular DIN connector. This connector is orientated at a right angle and may be rotated a total of 180 degrees. This low-inertia servo motor can be mounted using a flange mount.

MPL-A330P-MJ22AA

Product number MPL-A330P-MJ22AA is a 200-volt servo motor with low inertia. This unit was designed and produced by Allen-Bradley/Rockwell Automation. This product has a 100-millimeter-sized frame, as well as a 3.0-inch-long magnetic stack. The MPL-A330P-MJ22AA servo motor operates at speeds rated up to 5000 r/min. For feedback purposes, this motor includes a multi-turn encoder. The MPL-A330P-MJ22AA was designed to be used in applications requiring speed or motion control.

MPL-A330P-MJ24AA

Designed by Allen Bradley, part number MPL-A330P-MJ24AA is a 200-volt AC servo motor with low inertia. This unit has a 100-millimeter frame and a 3.0-inch-long magnet stack. Part number MPL-A330P-MJ24AA has a base speed rated at 5000 revolutions per minute. It features a high-resolution encoder that provides feedback in multiple rotations. This servo motor also features a 24-volt DC brake.

MPL-A330P-MJ72AA

Catalog number MPL-A330P-MJ72AA is a low-inertia servo motor. This unit was designed and produced by Allen-Bradley/Rockwell Automation as part of the MP servo motor series. This device has a 400 VAC voltage rating. The frame of this motor measures 100 millimeters, and the magnetic stack has a length measuring 3.0 inches. The MPL-A330P-MJ72AA operates at speeds of 5000 r/min. This unit has circular DIN connectors that are attached at a right angle and may be rotated up to 180 degrees.

MPL-A330P-MJ74AA

Catalog number MPL-A330P-MJ74AA is an MP-series servo motor with low inertia and a 200-volt rating. This unit was produced by Allen Bradley. Its frame measures 100 millimeters, and its magnetic stack measures 3.0 inches. A multi-turn high-resolution encoder provides the MPL-A330P-MJ74AA servo motor with feedback. This motor includes a 24-volt DC brake.

MPL-A330P-MK22AA

Product number MPL-A330P-MK22AA is a servo motor from Allen Bradley. It belongs to the MP series of servo motors. The MPL-A330P-MK22AA has a 200-volt voltage rating, as well as a 5000 rev/min speed rating. This motor has a 100-millimeter frame and a 3.0-inch magnetic stack length. This unit includes a multi-turn encoder with high resolution for feedback purposes. The MPL-A330P-MK22AA can be mounted via a mounting flange.

MPL-A330P-MK24AA

Part number MPL-A330P-MK24AA from Allen-Bradley is a servo motor with a 200-volt AC voltage rating, in addition to low inertia. This servo motor has a frame measuring 100 millimeters and a magnet stack measuring 3.0 inches. The base speed rating of the MPL-A330P-MK24AA servo motor is 5000 rev/min. It features a multi-turn encoder for feedback purposes, as well as a 24-volt DC brake.

MPL-A330P-MK72AA

Catalog number MPL-A330P-MK72AA is a low-inertia servo motor with a 200-volt rating. This unit has a 100-millimeter frame and a 3.0-inch-long magnetic stack. The base speed rating of this servo motor is 5000 rev/min. The MPL-A330P-MK72AA includes a multi-turn encoder for feedback, as well as a flange for mounting. The connectors of this motor are classified as circular DIN connectors.

MPL-A330P-MK74AA

Catalog number MPL-A330P-MK74AA is a 200-volt, low-inertia servo motor manufactured by Allen-Bradley/Rockwell Automation. The frame size of this device is 100 millimeters. Additionally, the length of the magnetic stack is 3.0 inches. The MPL-A330P-MK74AA servo motor can operate at speeds rated at 5000 rpm. This unit features a multi-turn encoder for feedback purposes. This servo motor also includes circular DIN connectors and a 24-volt DC brake.

MPL-A330P-SJ22AA

Product number MPL-A330P-SJ22AA is a 200 VAC low-inertia servo motor. The frame of this motor measures 100 millimeters. Additionally, the magnet stack of the MPL-A330P-SJ22AA measures 3.0 inches. The base speed of this unit is rated as 5000 rpm. It features a single-turn encoder for feedback, as well as a flange for mounting. This servo motor is suitable for applications that require motion or speed control.

MPL-A330P-SJ24AA

Designed and produced by Allen-Bradley / Rockwell Automation, catalog number MPL-A330P-SJ24AA is a 200V low-inertia servo motor. The base rated speed of this motor is 5000 revolutions per minute. It has a 100 mm frame and a 3.0 in. magnet stack. The MPL-A330P-SJ24AA servo motor features a high-resolution encoder that provides feedback in a single rotation. This motor includes a 24 VDC brake.

MPL-A330P-SJ72AA

Product number MPL-A330P-SJ72AA is an Allen-Bradley servo motor belonging to the MP series of products. This servo motor has low inertia and operates at 5000 revolutions per minute. The voltage rating of the MPL-A330P-SJ72AA is 200 volts. This unit has a 100 mm frame, along with a 3.0 in. magnetic stack length. The MPL-A330P-SJ72AA features a multi-turn high-resolution encoder, as well as circular DIN connectors. This servo motor can be mounted through the use of a mounting flange.

MPL-A330P-SJ74AA

A product of Allen Bradley, part number MPL-A330P-SJ74AA is a 200-volt low-inertia servo motor. This motor has a 100-millimeter frame. In addition, the MPL-A330P-SJ74AA has a 3.0-inch magnet stack. This servo motor has a base speed rating of 5000 rev/min. This product features a 24-volt DC brake, circular DIN connectors, and a single-turn encoder. The MPL-A330P-SJ74AA can be used in applications requiring motion or speed control.

MPL-A330P-SK22AA

Product number MPL-A330P-SK22AA is a low-inertia servo motor produced by Allen Bradley. The frame of this unit measures 100 millimeters. Additionally, its magnet stack measures 3.0 inches. The MPL-A330P-SK22AA servo motor can operate at speeds rated at 5000 rpm. It features a single-turn encoder and a mounting flange. This motor was designed to be used in speed or motion control applications.

MPL-A330P-SK24AA

Catalog number MPL-A330P-SK24AA is a servo motor from Allen Bradley. This device has low inertia and a 200-volt rating. This product's frame measures 100 millimeters. In addition, the magnet stack of the MPL-A330P-SK24AA measures 3.0 inches. The rated base speed of this servo motor is 5000 rev/min. This unit features a single-turn encoder for feedback purposes. Furthermore, the MPL-A330P-SK24AA has a 24-volt DC brake and a mounting flange.

MPL-A330P-SK72AA

The MPL-A330P-SK72AA servo motor from Allen-Bradley has low inertia and a 200 VAC voltage rating. It has a 100-millimeter frame and a 3.0-inch-long magnet stack. The base speed of this servo motor is rated as 5000 r/min. The MPL-A330P-SK72AA includes a single-turn encoder and a mounting flange. This servo motor has circular DIN connectors.

MPL-A330P-SK74AA

Manufactured by Allen Bradley, product number MPL-A330P-SK74AA is a low-inertia servo motor. It has a rated voltage of 200 volts, as well as low inertia. The frame of the MPL-A330P-SK74AA measures 100 mm, and its magnetic stack measures 3.0 in. The rated base speed of this servo motor is 5000 rev/min. It has a single-turn encoder and circular DIN connectors. This motor also has a 24-volt DC brake.

MPL-A420P-HJ22AA

The MPL-A420P-HJ22AA servo motor is a product of Allen Bradley. This unit has low inertia and a 200-volt rating. This device has a 115-millimeter frame, in addition to a 2.0-inch magnet stack. The rated base speed of the MPL-A420P-HJ22AA servo motor is 5000 revolutions per minute. This product has a 2000-line encoder and circular bayonet connectors. The MPL-A420P-HJ22AA can be flange mounted.

MPL-A420P-HJ72AA

The MPL-A420P-HJ72AA is an Allen Bradley low-inertia servo motor with a 115-millimeter frame. The MPL-A420P-HJ72AA has a 230-volt AC voltage rating. This unit also has a 12.7-ampere continuous stall current and a 46-ampere peak stall current. The speed at which this servo motor operates is rated as 5000 revolutions per minute.

MPL-A420P-HK22AA

Designed and produced by Allen Bradley, part number MPL-A420P-HK22AA is a low-inertia servo motor with a rated voltage of 200 volts. The frame of this motor measures 115 millimeters. Additionally, its magnetic stack measures 2.0 inches. The base speed of the MPL-A420P-HK22AA is rated at 5000 rev/min. For feedback purposes, this servo motor features a 2000-line encoder. It has circular bayonet connectors and a mounting flange.

MPL-A420P-HK72AA

Part number MPL-A420P-HK72AA is a low-inertia servo motor with a voltage rating of 200 volts. This device has a 115-millimeter frame and a 2.0-inch magnet stack. The MPL-A420P-HK72AA servo motor's base speed is rated at 5000 revolutions per minute. This device includes a 2000-line encoder for feedback purposes. It has circular DIN connectors and a mounting flange.

MPL-A420P-MJ22AA

Product number MPL-A420P-MJ22AA is a 200-volt servo motor with low inertia. This unit was designed and produced by Allen Bradley. It has a rated base speed of 5000 revolutions per minute. The frame of this product measures 115 millimeters, and the magnet stack measures 2.0 inches. The MPL-A420P-MJ22AA features a multi-turn encoder and circular bayonet connectors.

MPL-A420P-MJ24AA

Manufactured by Allen-Bradley, part number MPL-A420P-MJ24AA is a low-inertia servo motor with a rated speed of 5000 revolutions per minute. This unit includes a multi-turn encoder for feedback purposes. The connectors of this servo motor are circular bayonet connectors that face the motor's shaft. The MPL-A420P-MJ24AA has a frame measuring 115 millimeters. The voltage rating of this servo motor is 200 volts alternating current (AC).

MPL-A420P-MJ72AA

Part number MPL-A420P-MJ72AA, which was made by Allen-Bradley, is a low-inertia servo motor. It features circular DIN connectors, a mounting flange, and a multi-turn encoder. The MPL-A420P-MJ72AA has a rated voltage of 200 volts alternating current (AC). Additionally, the operational speed rating of this motor is 5000 r/min. This unit's frame measures 115 millimeters. Furthermore, its magnetic stack has a length measuring two (2.0) inches.

MPL-A420P-MJ74AA

The MPL-A420P-MJ74AA MP-series servo motor was designed and produced by Allen Bradley / Rockwell Automation. This product belongs to the 200V class of servo motors. This motor has low inertia. Additionally, the speed at which the MPL-A420P-MJ74AA operates is rated as 5000 rev/min. This unit has a multi-turn encoder for feedback. It also has a circular DIN connector and a 24 VDC brake.

MPL-A420P-MK22AA

Catalog number MPL-A420P-MK22AA from Allen Bradley is a 200-volt servo motor with low inertia. This device has a 115 mm frame and a 2.0 in. magnetic stack. The base speed of this servo motor is rated at 5000 rev/min. The MPL-A420P-MK22AA includes a multi-turn encoder for feedback purposes. This unit has circular bayonet connectors and a mounting flange. This motor was designed to be used in motion control or speed control applications.

MPL-A420P-MK24AA

The MPL-A420P-MK24AA servo motor was designed and produced by Allen Bradley / Rockwell Automation. This product has a rated voltage of 200 volts, in addition to low inertia. It has a 115-millimeter frame and a 2.0-inch-long magnetic stack. This servo motor can operate at speeds rated at 5000 rev/min. This device includes a multi-turn encoder for feedback purposes. It is suitable for use in applications that require speed control or motion control.

MPL-A420P-MK72AA

Designed and produced by Allen Bradley, product number MPL-A420P-MK72AA is a low-inertia servo motor with a 200-volt rating. This motor has a 115-millimeter frame, in addition to a 2.0-inch magnetic stack. The rated base speed of this servo motor is 5000 rpm. For feedback purposes, the MPL-A420P-MK72AA includes a multi-turn encoder. Furthermore, this motor includes circular DIN connectors and a flange for mounting.

MPL-A420P-MK74AA

Part number MPL-A420P-MK74AA is a 200-volt servo motor with low inertia. This unit has a 115 mm frame, as well as a 2.0 in. magnet stack. The base speed of this servo motor is rated at 5000 rpm. The MPL-A420P-MK74AA servo motor features a multi-turn encoder for feedback purposes. This product also features circular DIN connectors and a 24-volt direct current (DC) brake.

MPL-A420P-SJ22AA

Manufactured by Allen Bradley, product number MPL-A420P-SJ22AA is a servo motor with low inertia. The voltage rating of this device is 200 volts, and the base speed rating is 5000 rev/min. The MPL-A420P-SJ22AA servo motor has a 115-millimeter frame and a 2.0-inch-long magnetic stack. This product includes a single-turn encoder for feedback purposes. This servo motor is suitable for use in applications requiring speed control or motion control.

MPL-A420P-SJ24AA

Catalog number MPL-A420P-SJ24AA is an Allen Bradley MP-series servo motor with a 200-volt rated voltage and low inertia. This motor has a 115-millimeter frame, along with a 2.0-inch magnet stack. The MPL-A420P-SJ24AA can operate at speeds rated up to 5000 rev/min. For feedback purposes, this servo motor features a single-turn encoder. This device has circular bayonet connectors and a 24-volt DC brake.

MPL-A420P-SJ72AA

A product of Allen-Bradley/Rockwell Automation, product number MPL-A420P-SJ72AA is a 200-volt servo motor with low inertia. The MPL-A420P-SJ72AA has a 115 mm frame, in addition to a 2.0 in. magnetic stack. The base speed rating of this servo motor is 5000 rev/min. It features a single-turn encoder for feedback purposes. This motor also features circular DIN connectors.

MPL-A420P-SJ74AA

The MPL-A420P-SJ74AA MP-series servo motor is a product of Allen Bradley. It has a 200-volt rating and low inertia. This product has a frame measuring 115 millimeters, as well as a magnetic stack measuring 2.0 inches. The base speed of this servo motor is rated at 5000 rev/min. The MPL-A420P-SJ74AA features a single-turn encoder for feedback purposes. It also features a 24-volt DC brake and circular DIN connectors.

MPL-A420P-SK22AA

Catalog number MPL-A420P-SK22AA is a low-inertia servo motor from Allen Bradley/Rockwell Automation. This motor has a 200 VAC voltage rating. The frame of this product measures 115 millimeters, and the magnetic stack measures 2.0 inches. The speed at which this motor operates is rated at 5000 r/min. The MPL-A420P-SK22AA includes a single-turn encoder for feedback purposes. This servo motor also includes a mounting flange and circular bayonet connectors.

MPL-A420P-SK72AA

Part number MPL-A420P-SK72AA is a low-inertia servo motor produced by Allen Bradley. This unit has a voltage rating of 200 volts and a speed rating of 5000 rev/min. The MPL-A420P-SK72AA has a 115-millimeter frame and a 2.0-inch-long magnetic stack. This servo motor has an integrated high-resolution encoder which is used to provide feedback in a single turn. The MPL-A420P-SK72AA has circular DIN connectors.

MPL-A430H-HJ22AA

Allen Bradley manufactured the MPL-A430H-HJ22AA low-inertia servo motor. This product is a part of the MP series of servo motors and has a 200 VAC voltage rating. It has a frame measuring 115 millimeters, as well as a magnetic stack length measuring 3.0 inches. This servo motor operates at 3500 revolutions per minute. The MPL-A430H-HJ22AA features a 2000-line encoder, and it may be mounted via the use of a flange mount.

MPL-A430H-HJ72AA

Product number MPL-A430H-HJ72AA is a low-inertia servo motor belonging to Allen-Bradley's MP series of servo motors. It has a 200-volt rating, a 115-millimeter frame, and a 3.0-inch-long magnetic stack. The MPL-A430H-HJ72AA has an operational speed rated at 3500 revolutions per minute. For feedback purposes, this product features a 2000-line encoder. The connectors of the MPL-A430H-HJ72AA are circular DIN connectors.

MPL-A430H-HK22AA

The Allen-Bradley MPL-A430H-HK22AA is an MP-series low-inertia servo motor. The rated voltage of this device is 200 volts. Additionally, the MPL-A430H-HK22AA operates at a 3500 rpm rated speed. The frame of this motor measures 115 millimeters. For feedback, the MPL-A430H-HK22AA features a 2000-line encoder. This product has circular bayonet connectors and a flange for mounting.

MPL-A430H-HK72AA

Part number MPL-A430H-HK72AA is an Allen Bradley servo motor with low inertia and a 200 VAC voltage rating. This unit operates at speeds rated up to 3500 rev/min. The frame of this motor measures 115 millimeters. In addition, the magnet stack measures 3.0 inches. For feedback purposes, the MPL-A430H-HK72AA servo motor includes a 2000-line encoder. The connectors of this device are circular DIN connectors.

MPL-A430H-MJ22AA

Produced by Allen Bradley, catalog number MPL-A430H-MJ22AA is an MP-series low-inertia servo motor. This unit has a 200-volt rating and a 3500 rev/min speed rating. The frame of the MPL-A430H-MJ22AA measures 115 mm, and the magnetic stack length measures 3.0 in. A multi-turn high-resolution encoder is used for feedback purposes. The MPL-A430H-MJ22AA may be mounted via an IEC metric mounting flange.

MPL-A430H-MJ24AA

Manufactured by Allen-Bradley, part number MPL-A430H-MJ24AA is a servo motor with an operational speed of 3500 revolutions per minute and low inertia. The voltage rating of this motor is 460 volts alternating current (AC). This product utilizes a multi-turn encoder for feedback purposes. It has circular bayonet connectors, as well as a 24-volt direct current (DC) brake.

MPL-A430H-MJ72AA

Product number MPL-A430H-MJ72AA from Allen Bradley / Rockwell Automation is a low inertia servo motor. This motor belongs to the MP-series of servo motors. The MPL-A430H-MJ72AA has a multi-turn encoder, a shaft seal, and a circular DIN connector. Additionally, this product has an IEC metric flange so that it may be mounted. The rated speed of this device is 3500 revolutions per minute.

MPL-A430H-MK22AA

Product number MPL-A430H-MK22AA is a 200-volt, low-inertia servo motor from Allen Bradley. This unit operates at a 3500 r/min rated speed. The frame of this product measures 115 millimeters, and its magnet stack measures 3.0 inches. The MPL-A430H-MK22AA has a high-resolution encoder that provides feedback in multiple turns. This servo motor also has circular bayonet connectors.

MPL-A430H-MK72AA

The Allen Bradley MPL-A430H-MK72AA servo motor has a 200-volt rated voltage, as well as low inertia. This motor has a frame that measures 115 millimeters and a magnetic stack that measures 3.0 inches. For feedback purposes, the MPL-A430H-MK72AA servo motor features a multi-turn encoder. This product has circular DIN connectors and a mounting flange.

MPL-A430H-SJ22AA

Catalog number MPL-A430H-SJ22AA is an MP-series servo motor. This unit was produced by Allen Bradley, and it has low inertia and a 200-volt rating. The frame of this motor measures 115 millimeters, and its magnetic stack measures 3.0 inches. The MPL-A430H-SJ22AA can operate at speeds rated up to 3500 r/min. This product features a single-turn encoder for feedback purposes. The MPL-A430H-SJ22AA is suitable for use in various applications that require motion or speed control.

MPL-A430H-SJ24AA

Part number MPL-A430H-SJ24AA from Allen Bradley is a 200-volt MP-series servo motor with low inertia. This product has a 115 mm frame, along with a 3.0 in. magnetic stack. This device can operate at speeds of up to 3500 revolutions per minute. The MPL-A430H-SJ24AA includes a single-turn encoder for feedback, as well as a flange for mounting. This servo motor is equipped with a 24-volt DC brake.

Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.

Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

TOP